Sep 28, 2021 · sterile 0.2um ptfe syringe filter USA-PTFE Membrane Filter0.2µm, Acrodisc One PSF Syringe Filter - Pall CorporationPall US Sales Channel. Free ground shipping on Laboratory produc +8618057059123

PTFE Syringe Filters, 0.22 um, 13mm, Luer-Lok/Luer Slip, Nonsterile, 100 per pack TSH-SF14466 $113.99 Product Specifications Filtration area(cm2) 1.09 Wettability Hydrophobic Maximum operating temperature 130 Degrees C Bubble point (psi) 0.1 Burst pressure (psi) 87 Flow rate

10" OAL, 0.2 Micron, FiberFlo® Pleated Polypropylene Cartridge Filter - Sanitary Pleated Filters Thumbnails FiberFlo® “PM” Pleated Cartridge Filters are “Absolute” rated Hydrophobic cartridges that make an economic alternative to PTFE membrane filters for air, gases, and vent filter applications.

0.22 1 10 25 micron polypropylene PP pleated water filter cartridge for 10 inch single core filter housing, Microporous pleated filter element, the main filter material is : Stainless steel wire mesh, sintered wire mesh,Polypropylene, Hydrophobic PTFE, Hydrophilic PTFE,Polyether sulfone, Nylon, etc.

PTFE Membrane Cartridge with Polypropylene Hardware. by Filtersource.com. Sale. $ 193.54. SKU GGPTFE0.1A10C2V. Applications. High Purity - General Grade PTFE membrane cartridges are designed for multi-purpose use wherever a cost-effective PTFE membrane cartridge is required. GGPTFE series cartridges are hydrophobic and resist wetting in

Operating pressure: max 6.0 bar Flow rate: max 175.0 l/minline filter.Maximum pressure 6 bar. Maximum flow 175 l/min. Product Overview Items marked with an asterisk * in the drop-down menus are standard choices.

Depth Media - Polypropylene and Fiberglass; Membrane - PES, Nylon 6,6, PVDF, PTFE; PES and Nylon 6,6 positively charged; Layering options; Materials of Construction. Media choice; Polypropylene (outer housing, cage, core, end caps) Sealed by thermal bonding; Configurability. Inlets, outlets - see selections; Nominal Dimensions. Length: 2 to 30

PVDF Syringe Filter Polypropylene Housing: 2. PTFE Syringe Filter Part No. FE1322: FE1345: FE2522: FF2545 Description: Pore Size: 0.22um Diameter:13mm PTFE Syringe Filter Polypropylene Housing: Pore Size: 0.45um Diameter:13mm PTFE Syringe Filter Polypropylene Housing: Pore Size: 0.22um Diameter:25mm PTFE Syringe Filter Polypropylene Housing

Wholesale polypropylene filter products from polypropylene filter wholesalers, You can wholesale water filter, wholesale gas filter and more on Made-in-China.com.

RephiQuik 50mm PTFE filter RJF502210/RJF502250 is a ready-to-connect venting filter with a hydrophobic PTFE membrane. It is used in sterilization of fermenter air and the filtration of incubator gas to prevent culture media contamination. The filters are also well suitable for sterilization or filtration of an aggressive organic solution with

High quality products. Huge selection. Order online, call, or request a quote. Large selection of material types, housing sizes, and micron sizes. Expert advice. Samples available.. Polypropylene, Material: Polypropylene PTFE

EZFlow 25mm, 47mm, and 90mm membrane disc filters are used to retain particles or microorganisms by surface capture. The membrane disc filters are available in 0.22µm or 0.45µm pore sizes. The Hydrophobic PTFE membrane is bonded to a polypropylene support and due to its extreme chemical.

Membrane Technologies PTFE membrane syringe filter with pre-filter Available in 13mm, 25mm 0.2µm SYTG PTFE membrane syringe filter with pre-filter Available in 13mm, 25mm 0.45µm SYTF PTFE membrane syringe filter Available in 4mm, 13mm, 25mm 0.2µm SYTF PTFE membrane syringe filter Available in 4mm, 13mm, 25mm 0.45µm SYPP Polypropylene membrane syringe filter Contamination Monitoring – Lab

The filter combines 3 layers of filtration media in a compact pigment-free polypropylene housing, including two layers of glass fiber prefilters integrated with a layer of fine membrane filter. RephiQuik Max composite

syringe filters combine premium quality and economy. Sterile syringe filters are available in a variety of membrane choices and a polypropylene overmold housing; Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes; Sterilization treatment must be carried out before packaging; 100% integrity test, and Individually packaged.