With these filters, there is no need to pre-wet the membrane or flush pre-wetting chemicals. The hydrophilic PTFE membranes are able to maintain filtration integrity, reduce interference with biological processes, and maximize shelflife. Sterlitech's hydrophobic PTFE can also be used for filtering aqueous solutions, if pre-wetted with alcohol.

Minisart Air, for sterile venting and gas filtration, validated, non-sterile, gamma-irradiatable PTFE membrane, pore size 0.2 µm, connector inlet: Female Luer Lock. Related Products: Syringe Air Filter

PTFE Syringe Filters, 0.10 um, 25mm, Luer-Lok/Luer Slip, Nonsterile, 100 per pack, SF18085. Regular Price: $121.61. Price $105.75. As low as: $95.17. Description. Description. Puradisc Filters are produced from pigment-free polypropylene or polycarbote with standard inlet (female luer lock) and outlet (male luer) connections, unless otherwise

PTFE Membrane Filters, Aspire Laminated, Hydrophobic, Polypropylene Backer, 1.0 Micron, 200x250mm, 5/Pk Product code 0QL2092005 The pores of microporous membrane filters act as small capillaries. When hydrophilic membranes come into contact with

Description PVDF filter media, particularly microporous membranes, can be prepared to exhibit high efficiency for particle removal. PVDF has a low critical surface energy and conventional, hydrophobic, microporous PVDF membranes will not wet with aqueous fluids.MS Membrane stack consists of reinforced-type PVDF membrane.

Standard-Grade PTFE Membrane Filter Cartridges 2.7" x 30" (Configurable) The Cary Company’s standard grade 2.7" x 30" filter cartridges with expanded PTFE membrane offer high purity filtration with micron ratings from .1 to .45 micron. These

Sartorius Minisart™ High Flow (HF) Syringe Filters are complete, ready-to-connect units with a high-flow PES membrane. These 28mm filters are available in sterile and non-sterile options, with a 0.2 or 0.45μm pore size. Pricing and Availability. Sartorius Minisart™ RC Syringe Filters.

GGPTFE-Series High Purity General Grade PTFE Filter Cartridges, with expanded polytetrafluoroethylene (PTFE) membrane, provide superior chemical resistance for a broad range of industrial applications. With retention ratings as fine as 0.1μ (100 nanometers), consistent contaminant removal is achieved in aggressive fluids and organic solvents.

Minisart® HY with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12. Type 16596 with a pore size of 0.2 µm can be used for sterile filtration. It has a male luer lock outlet and version HYK is individually packed and sterilized by ethylene oxide (EO).

MS ® PTFE Hydrophilic Membrane With Polypropylene Supports Description MS ® PTFE hydrophilic membrane with polypropylene supports achieve excellent performance in liquid filtration,especially the aggressive liquid.Because our membrane has higher porosity,higher flow

Minisart SRP15 Syringe Filters Non-sterile, bulk packed | Syringe filt 15 mm | Hydrophobic Packaging: Non-sterile, bulk packed Type: Syringe filter with male Luer Slip Diameter: 15 mm Reaction to water: Hydrophobic Pore size: 0,45 µm Pack size: 50 Membrane material: Polytetrafluorethylene (PTFE) Housing material: Polypropylene (PP) Glass fibre

Sartorius 11806-37-N membrane filter 37mm diameter 0.45um pore size polytetrafluorethylene PTFE hydrophobic filter membrane circle disc (pack of 100) Unit Price £347.00 ex VAT

27/4/2021 · Because of the small pore size, PTFE membrane bags are up to eight times more efficient than a standard filter bag. This means it can cut out dust collector emissions by up to 800 percent. Additional Advantages of PTFE Membrane Another advantage of PTFE

Minisart SRP25 Syringe Filters Non-sterile, bulk packed | Syringe filt 25 mm | Hydrophobic Packaging: Non-sterile, bulk packed Type: Syringe filter with male Luer Slip Diameter: 25 mm Reaction to water: Hydrophobic Pore size: 0,45 µm Pack size: 50 Membrane material: Polytetrafluorethylene (PTFE) Housing material: Polypropylene (PP) Glass fibre

Membranes | Blue H2O Filtration. Used for critical air, gas, and liquid applications, membrane filters are typically constructed of thin polymeric filter media such as PES, PTFE, or nylon, and pleated to enable a large surface area.