The porous membranes are produced from pure PTFE; they are extremely inert and have very low absorption levels. There are two standard grades available for use in low to high flow applications. The M1 (0.1 micron) is a low flow type membrane suitable for most liquids and the M2 (0.8 micron) is a high flow type recommended for higher surface tension liquids.
Aijiren Tech Nalgene syringe filters are built to meet your lab’s clarification and sterilization needs. Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications. Whether your
PTFE Membrane Disc Filters. Strong, Chemically Resistant Membranes for Air Monitoring and Sampling in Aggressive Environments. Low chemical background permits highly sensitive, interference-free determinations. Ensures accurate gravimetric determinations with low tare mass. Ideal for filtration of gas and/or organic solvents.
Hydrophobic sterilizing-grade membrane filters for air, gas or vent service, typically manufactured with 0.2 µm pore-rated polytetrafluoroethylene (PTFE) or polyvinylidene fluoride (PVDF) membrane, have also traditionally been re-used in multiple batch service with
PTFE filter elements are produced by sintering pure PTFE granules. These can be supplied in our standard sizes or special sizes to suit your application. Grades 2 micron and 20 micron. PE elements can be supplied in grades from 2 micron to 100 micron
Fine Filtration Systems for Industry Product Information Filters for Process Gases Tel: +44(0)1622 718927 Email: info@headlinefilters.com Housing Model 150 151 152 150HP 151HP 152HP 150VP 151VP 152VP Port Size - NPT 1” 11/2” 2” 1” 11/2” 2” 1” 11/2” 2”
Ultradyne® Filter Cartridge The Ultradyne® filter cartridge is an absolute rated, pleated PTFE membrane cartridge which offers the greatest assurance of filtration performance and chemical compatibility in severe process conditions. Available in absolute retention
a standard tool to assess the in situ integrity and bacterial retention rate of a filter. All-fluorocarbon filters also have potential, 0.2 µm sterilizing grade, double layer PTFE filter membrane. This is held within support and drainage layers made (PPS ...
Grade B Borosilicate Glass Fiber. Grade B glass microfiber filters are ideal for the collection of biochemical polymers that have been precipitated by denaturation. This material is twice as thick as Grade A with a higher loading capacity. These filters may also be used as a solid particulate filter for gasses or as a prefilter.
Grade PTFE Filter Cartridges, with expanded polytetrafluoroethylene (PTFE) membrane, provide optimized filtration performance in sterile air/gas filtration and venting applications. The single layer PTFE membrane, with over twice the hydrophobicity prevent water
Sartofluor ® air filters are especially suited to demanding venting applications with high volume gas streams, extreme humidity, and stringent Steam-In-Place regimes. The hydrophobic PTFE membranes and further components used in Sartofluor ® filters offer reliability, process security, and long service life.
Choose Sartofluor® PTFE for optimum air filtration The optimum means The air filter as a barrier needs to be highly reliable under all circumstances, i.e. pres-sure pulses, high steaming cycles, elevated moisture content etc. That‘s why we opti-mized our Sartofluor
GTM grade PTFE cartridges are designed for general purpose use wherever a cost effective PTFE membrane filter is required. Manufactured with inherently hydrophobic PTFE membrane, these cartridges are designed for use in the filtration of aggressive solvents, and as compressed gas and vent filters.
PTFE Membrane Filters, Aspire Laminated, Hydrophobic, Polypropylene Backer, 5.0 Micron, 200x250mm, 5/Pk Product code 0QL2072005 The pores of microporous membrane filters act as small capillaries. When hydrophilic membranes come into contact with
Grade PTFE Filter Cartridges, with expanded polytetrafluoroethylene (PTFE) membrane, provide optimized filtration performance in sterile air/gas filtration and venting applications. The single layer PTFE membrane, with over twice the hydrophobicity prevent water