SteriVENT™ venting filters with an integral hydrophobic PTFE membrane and PP housing are well suited for sterile venting of vessels and tanks during draining and filling. These filters are capable of allowing clean air to pass into the vessel while preventing microbiological contamination.For the safety of the workers and your equipment, always use a vent filter. These devices act as

Whatman PTFE membranes fromCytiva are strong hydrophobic membrane filters resistant to the corrosive solvents and aggressive media used in gas sterilization and liquid clarification. Polypropylene grid support material for increased strength Temperature resistant up to 120°C Resistant to most

Whatman PTFE membranes are chemically stable and inert. They are suitable for applications involving aggressive organic solvents, strong acids, and alkalis. PTFE membranes are particularly suitable for preparing samples for HPLC analysis. The hydrophobic nature of the membrane also has applications for air and gas sterilization.

Whatman 2103 SteriVENT PTFE 36 Venting Filter Membrane with 3/8". This fits your . Make sure this fits by entering your model number. Filtration Area: 500 sq cm; pore size: 0.2 µm. Fittings: 3/8 to 1/2 inch stepped hose barb. Hydrophobic PTFE membranes and polypropylene housings. Retain gt; 107 CFU/cm2 Brevundimonas diminuta per ASTM F838-83

Flows in both directions with hydrophobic PTFE membrane. Whatman™ PolyVENT™ Vessel Venting Filters are integral filter products for sterile venting of vessels and tanks. Constructed from a single, standardized set of materials. Membrane made of hydrophobic 0.2 µm PTFE membrane. Validated for 50 steam autoclave cycles; compatible with EtO.

Polyvent Filters (PTFE Membranes) are Rated 0.2 m, in Liquid Retention of aqueous solutions with particulates by hydrophobic microporous membranes is a function of their WBT value, rather than the pore size (4). Liquid water presented to the surface of a hydrophobic membrane at a pressure lower than the WBT pressure will be blocked by the membrane.

This item: Whatman PTFE PolyVENT 4 Venting Filter Discs Membrane Stepped Barb Fittings, 25mm Diameter, 0.2 Micron (Pack of 50) $142.10 ($2.84/Filter Discs) Only 3 left in stock - order soon.

Whatman ReZist in-line disk filters from Cytiva are lightweight devices suitable for venting, in-line filtration, and isolation applications when working with chemically harsh solvents. Integral hydrophobic PTFE venting membrane is resistant to harsh solvents Can be autoclaved multiple times without loss of integrity

Whatman™ PolyVENT™ Vessel Venting Filters are integral filter products for sterile venting of vessels and tanks. Constructed from a single, standardized set of materials. Membrane made of hydrophobic 0.2 µm PTFE membrane. Validated for 50 steam autoclave cycles; compatible with EtO.

Whatman PTFE membrane filters from Cytiva's business are chemically stable and inert, making them suitable for use with aggressive organic solvents, strong acids, and alkalis. Order Product. ×. Select Model. ID. Product Name. 28415319. PTFE Membrane, TE Range (TE 35), 0.2 µm pore size, 25 mm circle (50 pcs) 28415320.

Cytiva's Whatman™ 6713-1651 PolyVENT™ 16 Venting Filter Disc (50mm) for Sterile Applications with 0.2µm PTFE Membrane, Inlet/Outlet: 3/8-Inch Stepped Barb (Pack of 100) Applications include sterile venting (filling) of vessels and tanks, isolation (incubators, autoclaves, lyophilizers, EtO sterilizers, fermenters), and Electronics (gases)

The 0.5 μm pore size is normally used. Air and gas sterilization make use of the hydrophobic characteristics of PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 μm and 0.5 μm. Sterile venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 μm membranes.

The 0.5 μm pore size is normally used. Air and gas filtration use the hydrophobic characteristics of PTFE membranes and their ability to stop aqueous aerosols. Usual pore sizes are 0.2 μm and 0.5 μm. Venting of vacuum manifolds, fermentation vessels, and sterile filtrate tanks and containers utilize PTFE 0.2 μm membranes.