Protect vacuum sources and tank/bioreactor venting from contamination and moisture damage. Millex Filters: Inlet and Outlet for Latex Tubing are constructed of sturdy polypropylene with hydrophobic PTFE membranes. Available in 0.2, 0.45 and 1.0μm pore sizes.

There are also specialized filter units to protect hemodialysis transducers from blood and moisture. The 50 mm Millex® filter units are especially useful for vacuum line protection. All units are bi-directional. A 50 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane.

Pvdf Vacuum Filter found in: Denville® Vacuum Filtration Flasks, Vacuum Filtration Apparatus Systems, PVDF Filtration, PVDF Top Filter, MILLEX® Nonsterile.. fit on 45mm neck bottles 45mm neck size The Denville 250ml, 500ml and 1000ml Vacuum Filtration Flasks

2. Decide an appropriate pore size. The pore size of a filter, stated in microns (aka micrometers or µm), is determined by the diameter of particles retained by the filter or by a bubble point test. • Nominal ratings are the pore size at which a particle of defined size will be retained with an efficiency below 100% (typically 90-98%)

Syringe Filter, Filter, Mbr Membrane manufacturer / supplier in China, offering FDA Standard PTFE Filter Membrane for Sterile Filtration 0.22 Micron SGS Test, Nylon/Pes/PVDF/PTFE Pleated Filter Cartridges Compatible with Millipore′ S Water System, Membrane

Protect vacuum sources and tank/bioreactor venting from contamination and moisture damage. Millex Filters: Inlet and Outlet for Latex Tubing are constructed of sturdy polypropylene with hydrophobic PTFE membranes. Available in 0.2, 0.45 and 1.0μm pore sizes.

This 33 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses. Millipore

Membrane Filters Sample Vial Water Filters & Purification System Membrane Cartridge Filters Membrane Rolls Retrofit for Dow SFP-2660 Retrofit for Dow SFP-2860 Retrofit for Dow SFP-2880 Retrofit for Hydranautics HYDRAcap Max60 Retrofit for Hydranautics

Syringe Millex-FG Filter, 0.20 µm, Fluoropore (PTFE) 13 mm, non-sterile / PK 100 Catalogue number: SLFGX13TL This 13 mm syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in preparation of organic solutions prior to

Hydrophilic PTFE Millex® filters are HPLC-certified for low extractables - Best recovery of protein samples with hydrophilic Durapore® PVDF Millex® syringe filters Automation-compatible, non-sterile Millex® syringe filter units have a domed housing which enables smooth, reliable delivery in automated sample preparation workstations by eliminating shingling between filters on the transport

The Stericup™ vacuum filtration system is the most efficient single-use, disposable process for sterile media preparation. It combines a Steritop™ filter unit with a receiver flask for processing and storing volumes from 150 mL to 1,000 mL in a single, ready-to-use format. Pricing and Availability.

Aijiren Techbrand™ PTFE Filter Membranes. Aijiren Techbrand™ PTFE membrane is hydrophobic filter made of polytetra-fluorethylene laminated with PP layer. Pricing and Availability. Sartorius™ Midisart™ 2000 PTFE Air Filter. Designed for easy handling and maximum safety in air filtration. Sartorius™ Midisart™ 2000 PTFE Air Filter entirely

Merck Millipore Millex Samplicity Filters, Hydrophilic PTFE To be used with the Samplicity Filtration System. Powered by vacuum, the system takes minimal manual effort to filter 1 to 8 samples into standard HPLC vials in seconds, with higher recovery than syringe filters provide.

PTFE Syringe Filter - Sterile OMICRON - PTFE SYRINGE FILTERS - STERILE Technical Specifications Retention Hydrophobic Effective filtration area 0.1cm² for 4mm, 0.8 cm² for 13mm & 3.9 cm² for 25mm Hold up volume 10 µl for 4 mm, 20 µl for 13 m in

7 Membrane Pore Size (ìm) Process Volume (max) Qty/Pk Catalogue No. 25 mm Glass Fiber Filter 1.0 PB 100 mL 200 (8 x 25) SLPBDZ5NZ 1000 SLPBDZ5NK Millipore LCR (Hydrophilic PTFE) Membrane 0.20 LG 100 mL 200 (8 x 25) SLLGDZ5NZ 1000