Filter Media: PTFE on a polypropylene support; Housing: Polypropylene; Effective Filtration Area. 19.6 cm 2; Dimensions. Overall Length: 8.2 cm (3.2 in.) Diameter: 7.3 cm (2.9 in.) Inlet/Outlet Connections. Stepped hose barbs 6.4 - 12.7 mm (1/4 - 1/2 in.) diameter, 1/8 in. MNPT, 9.5 mm (3/8 in.) straight pipe; Maximum Operating Pressure

PTFE Membrane Figure 3 These photomicrographs compare the expanded PTFE membrane (top) to a heavily calendered woven cloth (bottom) of similar permeabilities. The GORE expanded PTFE membrane retains particles on the surface of the filter sock. Figure 4: Pall Zylon Backwash Filtration System with molded support elements.

Target2™ PTFE Membrane, 30mm, 0.20μm, 100-pk (F2600-4) Part Number: F2600-4 UPC: Pack Size: 100-pk Product Type: PTFE Membrane Diameter: 30 mm Product Size: 0.20 μm Corning® 50 mm Diameter Syringe Filters, 0.2 µm Pore PTFE These Corning® syringe filters have polypropylene copolymer housings, hose barb inlets and hose barb outlets.

Filters aqueous solutions or aggressive chemicals. Low protein binding membrane gives high recovery of critical proteinaceous samples. HPLC certified. Provides assurance that the filter will not add artifacts to your analysis. Low API adsorption. “Pall Laboratory products are designed for laboratory applications only.

PTFE Membrane Disc Filters - 2 µm, 47 mm (50/pkg) Product ID. R2PJ047. Material. PTFE with PMP (polymethyl- pentene) support ring. Air flow rate (0.7 bar (70 kPa,10 psi) 53 L/min/cm². Diameter. 47 mm.

Offers broad chemical compatibility with PTFE membrane and polypropylene housing; 100% integrity-tested to provide the high level of confidence you require “Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications.

Pall Acrodisc Syringe Filters, 25mm, Pall Life Sciences Ptfe Membrane is a reliable and dependable addition to the Pall Filters family of products. Combining top-notch and uncompromising quality with an affordable price, the Pall Acrodisc Syringe Filters, 25mm, Pall Life Sciences Ptfe Membrane 4225/ 28143-926 can fulfill your laboratory needs while still offering a great value for the money.

1-800-521-1520. Description. PTFE Membrane Disc Filters - TF 200, 0.2 µm, 142 mm (25/pkg) “Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen

Seal Washer: PTFE; Effective Filtration Area. 0.8 cm 2; Dimensions. Overall Length: 3.5 cm (1.4 in.) Diameter: 1.6 cm (0.6 in.) Filter Size. Accepts 13 mm filter; Inlet/Outlet Connections. Female threaded luer inlet, male slip luer outlet; Maximum Operating Temperature. Limited by filter type; Maximum Operating Pressure. 2.8 bar (280 kPa, 40 psi) Sterilization

The PTFE, 316L stainless steel, nickel and ceramic media employed in Pall filters are intended for gaseous service. Refer to the photomicrographs for detailed images of the media. Construction Techniques The highest degree of cleanliness and the integrity of each gas filter element and assembly is assured by rigorous quality control and

Pall Corporation is a filtration, separation and purification leader providing solutions to meet the critical fluid management needs of customers across the broad spectrum of life sciences and industry. Pall works with customers to advance health, safety and environmentally responsible technologies.

PTFE Membrane Disc Filters. Manufacturer: Pall Corporation Family Part #: PALL TSI-66147. Strong, Chemically Resistant Membranes for Air Monitoring and Sampling in

Sterile filtration can be employed in these applications to prevent the introduction of microbial contaminants, such as molds and bacteria, via the CO 2. Emflon® PFRW filters , featuring two layers of Pall 0.2 micron polytetrafluoroethylene (PTFE) membrane, are designed to remove bacteria, yeasts, molds, and particles from gas (CO 2 ) streams

Pall Filter 60146. Teflo Membrane PTFE with PMP (polymethylpentene) support ring. Pore Size: 3 um. Diameter: 47 mm. Typical Thickness: 30.4 um. Typical rosol Retention: 99.79%. Pall Filter 60150. Type A/E Glass Fiber Discs and Sheets Borosilicate glass without binder. Pore Size: 1 um. 63 mm. Typical Thickness: 330 um.

membrane materials. Specifications Description Zefluor™ MembraneTeflo Membrane Zylon™ Membrane TF (PTFE) Membrane Filter Media/Support PTFE with PTFE support PTFE with PMP (polymethyl-pentene) support ring Unsupported PTFE PTFE on a polypropylene support Typical Thickness 0.5 µm: 178 µm (7 mils) 1 µm: 165 µm (6.5 mils) 2 and 3 µm: 152 µm (6 mils)