with the liquid you want to filter by performing a trial filtration run before you start your actual filtration. Both membrane & housing compatibility need to be considered together. FL61650618_W Compatible: ++ Limited compatbility: + Not compatible: — n.a.: Not

Phenomenex developed Verex Filter Vials with diverse color-coded caps for easy identification of the correct membrane and pore size for the various samples that undergo filtration. Five different membrane types (regenerated cellulose, polytetrafluoroethylene, nylon, polyethersulfone, and polyvinylidene fluoride) and two pore sizes (0.2 μm and 0.45 μm) are available for diverse and unique samples.

2017/10/3 · The SecurityCAP solvent/eluent caps utilize a filter with an integrated one-way valve that protects lab air quality from hazardous vapors and gases that can leave the solvent container. The solvent filter also incorporates a PTFE membrane that captures dust, dirt, and other contaminants in the air and prevents them from entering the solvent/eluent container, protecting the solvents from

Membrane Solutions offers full membrane filter for various solvents or liquid or gas, including PES , MCE, Nylon, PVDF , PTFE , PP , CA, Nylon Mesh and PC, the disc diameter is from 13mm to 293mm, which are manufactured in ISO 9001 certified facility. Most membranes can be sterilized if needed.

2010/12/15 · A new membrane filter was used in each adsorption test as recommended by the manufacturers. In the screen test, 1 ml of estrone stock solution was fed into each filter using a disposable syringe (Terumo).Permeates were collected in 2 ml amber glass vials (Aijiren) and subsequently analysed by HPLC to measure the estrone concentrations.

PTFE. PTFE membrane, hydrophobic, resistant to strong acid, strong alkali and high temperature, suitable for the filtration of strong corrosive solution, organic solution and gas. PVDF. PVDF membrane, hydrophobic, low protein binding, suitable for general biological filtration, not suitable for filtration of highly corrosive liquids. Nylon.

Filter Membranes Phenex • RC, Nylon, PTFE (Teflon®), and other membranes available • Wide selection of membrane sizes Phenex PTFE (Teflon ®) and Regen-erated Cellulose (RC) membrane filters offer excellent chemical resistance to almost all

PTFE is an inherently hydrophobic membrane, excellent for filtration of organic-based, highly acidic or basic samples and solvents. Widely used in chromatography, it is especially well suited for the clarification of non-aqueous samples. Although this membrane

PTFE is an inherently hydrophobic membrane excellent for filtration of organic-based, highly acidic or basic samples and solvents. Widely used in chromatography, it is especially well suited for the clarification of non-aqueous samples. Although this membrane is hydrophobic, it can be made hydrophilic by wetting the membrane with alcohol and then flushing with deionized water.

Description of PTFE Membrane Filters PTFE membrane filter is made of polytetrafluoroethylene ultrafine fibers by hot-melt bonding together. Difference from glass fiber membrane, PTFE filter is a kind of membrane material for deep filtration.Membrane filter disc has the following characteristics: membrane filter 0.22 μm is produced from food-grade isotactic polypropylene.

PTFE is naturally very clean and inert for use even in highly aggressive solvents. • Due to its strong hydrophobic characteristics PTFE filter are used mainly for filtration of samples that contain organic solvents. • Compatible with both strong acidic and basic

Catalogue Number. JGWP04700. Trade Name. Omnipore. Description. Omnipore Membrane Filter. Background Information. Our Fluoropore™ membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications.

This PTFE membrane is a good choice for use with aggresive organic solvents Solvent Filter, PTFE, 47 mm, 0.2 µm, Non polar, 100/pk - WAT200535 : Aijiren Technology My Account

Description of Polypropylene Membrane Filter Microporous membrane filter 0.45 μm is made of polypropylene ultrafine fibers by hot melt bonding, which is a kind of membrane material for deep filtration. As a polypropylene membrane filter suppliers, the pp membrane is made of food-grade isotactic polypropylene, without any additives in the whole production process.

Phenomenex products are available worldwide. support@phenomenex.com www.phenomenex.com IL82410812_L filter, clogging of the membrane filter is prevented and sample clean up is optimized. Outlet connection is luer lock. aF0-8515-12 5 100/Pk 5 ...