Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores.
Minisart SRP units with a clean and chemically inert PTFE membrane. For solvents such as acetone, dimethylformamide and DMSO, or for aggressive aqueous liquids. Minisart SRP15 with small spike outlet is recommended for filtration of narrow-necked vials.
Syringe Filter Minisart SRP4, PTFE, 4 mm, 0.45µm, non-sterile, 50 pc/PAK a clean and chemically inert PTFE membrane. The units are ready-to-use and allow for ...
Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Simple, rapid and reliable ultracleaning. Feature a coating-free, hydrophobic PTFE membrane that is chemically inert.
Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores.
Minisart HY with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12. Type 1659A with a pore size of 1 µm can be used as particle and aerosol barrier.
Minisart SRP: Ready-to-use units with a clean and chemically inert Polytetrafluoroethylene (PTFE) membrane for simple, rapid and reliable ultra cleaning of small volume samples for HPLC or GC analysis.
Minisart SRP: Ready-to-use units with a clean and chemically inert Polytetrafluoroethylene (PTFE) membrane for simple, rapid and reliable ultracleaning of small volume samples for HPLC or GC analysis. Provide superb chemical resistant for solvents or for aggressive aqueous liquids.
compatibility with the liquid you want to filter by performing a trial filtration run before you start your actual filtration. Legend Compatible ++ Limited compatibility + Not compatible - not analyized n.a. 1) gamma irradiation feasible for Minisart ® Air Chemical Compatibility Chart For Minisart® Syringe Filters
Minisart® Syringe Filters Removal of Particles and Microorganisms from Liquids and Gases Sartorius offers Minisart ® syringe filters for a wide range of applications. The filters are clean and safe as they are almost free of leachables and exractables. Additionally, they reliably remove particles and microorganisms with no leakage.
Minisart ® RC is optimized for aqueous liquids, solvents & chemicals of all sorts. Minisart ® NY is exceptionally fast and pure compared to competitor products and perfect for analytical standard operations. Minisart ® SRP’s coating-free hydrophobic PTFE membrane is suitable for venting
Syringe filter Minisart® SRP, PTFE. With a chemical-resistant, hydrophobic PTFE membrane for high purification of solvents or aggressive liquids in HPLC or GC analysis. Low adsorption. Show.
The low-binding PTFE membrane is the best option for leachable free filtration whenever highest chemical compatibility and pH values of 1 - 14 are needed. For hydrophilic solutions pre-rinsing with a solvent is necessary to make the hydrophobic membrane permeable for aqueous liquids.
May 20, 2020 · Leading supplier of PTFE membrane filter since 2007,any requirement about PTFE membrane filter,please contact Aijiren, filter Minisart. solvent compatibility 0 ...
Minisart® SRP15 Syringe Filter 17559----------Q, 0.45 µm hydrophobic PTFE. Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17559 with a pore size of 0.45 µm can be used for sample preparation and has a male spike outlet. Version Q is a non-sterile bulk pack.