Our ePTFE membrane is a very thin, porous layer that prevents particulate matter from entering the body of the filter bag. Without the ePTFE membrane, particulate matter will penetrate the conventional filter, making it weaker and more resistant to airflow
Steam Filter Selection Stainless steel is the material of choice for steam prefilters. The cartridge is usually selected according to application-dependent criteria such as flow rate versus pressure drop. Inherently hydrophobic materials such as PTFE are chosen for
Membrane cartridges are typically chosen for their absolute ratings and their guarantee of sharp particle-size cutoff, making them an attractive choice for critical filtrations. General Filtration’s WAT and WBM cartridges are made of asymmetric Polyethersulfone (PES) membranes with
ePTFE filter bag provide a cost effective solution for many industrial operations. They are highly versatile and efficient in dust and fume collection Features 70% Porosity High efficiency of removing dust particle Smooth surface after Singeing、calendaring
The PHFZ-II (4+3) is 40″ and 30″ welded, with an integral cage outer diameter of φ69. ⑥Pleated Cellulose Filter Cartridge. Pleated Cellulose Filter Cartridge is economical, yet highly effective for general water filtration purposes. It can capture 20 sediment filter particulates down to nominal 20 microns in size.
Tetratex® PTFE membrane material is strong, with high resistance to acids and alkalies, and good for applications up to 135 C / 275 F. Features Heat-seam construction results in a seam with increased dependability and efficiency
Power generation. Process filtration throughout the main CO 2 coolant loop and active (liquid) effluent treatment in the AGR fleet, separation of solids in caesium removal packages, filtration safety valve protection (and solids removal in Filtered Containment Venting systems in water cooled reactor systems) , storage and transport package
membrane filter (1 × 10−12 m2) which is frequently applied to high temperature filtration in many industrial processes. The PG-filter with 0.9 mm in total thickness has a highly porous PTFE layer with 0.1 mm in thickness, while the commercial membrane filter
The experimental results showed that the PTFE membrane had a filtration efficiency of above 99.99% for micron particles, and excellent regeneration behavior was obtained, though a
2021/2/25 · GasPro ™ TEM-2260 series filters are specifically designed for the filtration of semiconductor gases when ultra-high flow rates are required. This all-welded assembly will deliver 0.003 micron particle retention where a high flow rate is required and space is limited. A PTFE membrane and polypropylene supported cartridge is enclosed in a 316L
Buy Kinesis KX Nonsterile Syringe Filters, Hydrophilic PTFE and more from our comprehensive selection of Syringe Filters from Cole-Parmer Compatible with many non-aqueous and organic solvent mixtures Solvent-resistant filter housing with nominal extractable
Acro® 37 TF Vent Device With PTFE Membrane. Multi-Purpose Filter for Small-Volume Venting and Gas Filtration. PTFE membrane and polypropylene housing have broad chemical compatibility. Disposable - Eliminates the cost and labor associated with disc-loaded stainless steel filter holders. Autoclavable. Economical -Available in bulk packaging.
KLR-Filter ® generation, is equipped with a PTFE membrane to separate particulates. KLR-bran are suitable for thermal processes and painting processes, as well as for high efficiency air recirculation. The diagram shows a KLR-bran filter including PTFE