Membrane Microfiltration Glassware. This 47 mm filtration apparatus with fritted glass support is recommended for routine filtration of corrosive liquids and removal of particles from LC solvents. The ground joint connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers.

Rugged polypropylene housing. Autoclavable to 121°C for 15 minutes. Color coded for easy identification. Variety of filter types, porosities, and diameters. Applications. Cellulose Acetate, Nylon, PES, PVDF filters are ideal for hydrophilic applications. PTFE filters are suitable for hydrophobic applications.

Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon. Preslit PTFE/silicone caps help eliminate broken autosampler needles and cored septa. Rugged polypropylene vial houses insert with 450 μL loading capacity and low dead volume (120 μL).

10118-322PK 371.6 USD. 10118-322 10118-326. Thomson SINGLE StEP Standard Filter Vials, Restek. Filters Syringeless Filters. Recommended for samples containing less than 10% solid particulates, these standard filter vials are constructed using PTFE or PES for long-lasting durability. Minimize sample loss by eliminating multiple transfers.

Restek. This high-pressure cup-type filter can be used in fluid streams operating to 15,000 psi (103,421 kPa). The cup-shaped filter elements have a large (2.5 cm 2 ) surface area to give long operating lifetime. Mounted in screw-type adapters, they are easily removed for cleaning. Normally, backflushing.

Figure 2: Thomson SINGLE StEP® filter vials are an economical alternative when compared to material and time costs of conven-tional filtration. Table I: Many common drugs and compounds of interest in clinical/toxicology or drinking water samples are compatible with Thomson SINGLE StEP® filter vials. Dirty samples and complex matrices can cause interference and

Syringe Filters Solvent Compatibility Chart 1 Protect any analytical system. 2 Extend LC column lifetime. 3 Achieve more reproducible analyses. 4 Variety of membranes, porosities, and diameters available. 5 Luer lock inlet provides strong, leak-tight syringe connection to withstand filtration pressure. 6 Rugged polypropylene construction— autoclavable to 121 °C for

PTFE membrane and polypropylene housing have broad chemical compatibility. In-line filters can be used to help protect against bloodborne pathogens. They are useful for benchtop fermentors, in-line gas filtration for sterile air or CO2, and protection of vacuum pumps from damage by aqueous solutions. These filters are autoclavable for easy

Thomson SINGLE StEP eXtreme Filter Vials. Provide multilayer filtration for viscous samples and samples containing up to 30% solid particulates. Allow compounds to be separated from matrix, resulting in both higher signal-to-noise ratios and more differentiated peaks. Easy-to-use vials offer fast sample filtration and require only a squeeze of

GE Healthcare Whatman Filtration Products Brochure. This brochure highlights the extensive range of GE Healthcare filtration solutions for pharmaceutical quality control offered under the Whatman brand. Whatman filter papers are world-renowned as a standard for laboratory filtration and are associated with quality, reliability and customer service.