VWR® Hemostatic Forceps, Serrated Tip. Catalog Number: (82027-416) Clearance. Supplier: VWR International. Description: Hemostatic forceps are used in many surgical procedures, usually to control bleeding or the flow of liquids in tubing. ,82027-416PK,82027-416CS,82027-416EA. Retrieving Pack Retrieving Case Retrieving Each. -.

Syringe filters, RanDisc™, PTFE membrane. Filters Syringe Filters. These syringe filters are ideal for rapid and reliable ultra-cleaning of small volume samples for HPLC or GC analysis, which require an even more chemical resistant unit for solvents such as acetone dimethylformamide and DMSO or for aggressive aqueous liquids. Ready to use units.

Millex-FA Syringe Filter Unit, 1.0 µm, hydrophobic PTFE, 50 mm, HB-HB. Product Number. Product Description. SDS. SLFA050. A 50 mm diameter non-sterile syringe filter with a 1 µm filter pore size hydrophobic PTFE membrane. The 1 micron filter comes in a pack of 10.

Membrane Filter (2) Membrane and Funnel (8) Push Button Valve (1) 22 Gauge x 51 MM Needle, PTFE Plunger Tip, FN Needle Tip, Gas Tight, ... Syringe VWR 60375497 "1 ...

Membrane filters made of microporous PTFE, with 0,2 mm thickness.

Membrane filters, type 118. Filters Membrane Filters. PTFE hydrophobic membrane filters. For filtration of air, gases, solvents and acids. Sterilisation by autoclaving or ethylene oxide. New Product.

The filters can be installed in compact, automated, or modular units. These strainers can be used as separators between stacked discs in a single filter holder during serial filtration. Membrane filters are virtually inert to chemical and biological agents, ensuring stability when filtering concentrated acids, alkalis, or oxidizers.

Description: PTFE hydrophobic membrane filters. For filtration of air, gases, solvents and acids. For filtration of air, gases, solvents and acids. Sterilisation by autoclaving or ethylene oxide.

VWR® syringe filters Available with either PP, PTFE or nylon membrane. Membranes are available in either 0,2 or 0,45 µm pore size a choice of analytical column packing size. If the column packing size is larger than 3 μm then use 0,45 μm and if it is 3 μm or smaller then use 0,2 μm. Highly suitable for HPLC with

Nylon membrane 0,2 25 - 100 514-0066 0,45 25 - 100 514-0067 PP membrane These polyvalent filters are designed for the preparation of mixed samples. They fulfil a broad range of chemical compatibility for aqueous/organic mixtures. PTFE membrane These PTFE membranes are designed for filtration of corrosive gases and organic solvents.

axiva membrane filter chemical compatibility chart Chart below shows the Chemical Compatibility of various types of membrane filters with some commonly used 0 chemicals. All types of membrane filter products were exposed to specified chemicals/reagents for 3 days at 25 C. Upshot: All products retain its Integrity after Chemical compatibility Test.

Supplier: Chemglass. Description: Clear polycarbonate desiccator with extra-heavy walls to eliminate the danger of implosion. ,80060-662EA,80060-658EA,80060-660EA. This product is no longer available. Alternatives may be available by searching with the VWR Catalog Number listed above.

Membrane filters, PTFE, TE range, Whatman™. Hydrophobic PTFE membrane filters are chemically stable and inert, making them suitable for use with aggressive organic solvents, strong acids and alkalis. One of the major applications for the PTFE membrane is the clarification of corrosives, solvents and aggressive fluids.

Description: Strong, chemically resistant PTFE membranes have unique PMP (polymethylpentene) support ring for PM10 and PM2.5 dichotomous and other air sampling tec ,28139-131PK,28139-129PK,28139-109PK,87003-880PK

Syringe filters. Filtre Sprøjtefiltre. Available with either PP, PTFE or nylon membrane. Membranes are available in either 0,2 or 0,45 µm pore size, with the choice often made on analytical column packing size. If the column packing size is larger than 3 μm then use 0,45 μm, and if 3 μm or smaller then use 0,2 μm.