The filter may be suitable for short term, non-critical use. N = ot Recommended. The membrane may be unstable. N - = nsufficient Data. Information is not available. Trial testing is recommended. I atent 7, 790, 117P Continued on back page www.restek.com

Sterile PTFE membrane gas filter (SLF-T) Permanently hydrophobic PTFE membrane Suitable for all intergrity test procedures, incl. WIT test Pleated surface for high flow rate and long life Stringent in - line steam sterilisations (up to 150 cycles at 121 C)

Description Filter air and gasses, even at low differential pressures. Sartorius PTFE (Polytetrafluorethylene) Membrane Filters are permanently hydrophobic with low adsorption and excellent chemical compatibility. Choose from four pore sizes in a variety of diameters.

PTFE Membrane Filter PTFE Syringe Filter Contact us English Chinese English English 中文 HOME Products unlaminated ptfe 0.22 micron filter for gasses palstic 0.2um ptfe syringe filter on stock CONTACT US Tel:8618057059123 E-mail Address： NO ...

Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon. Preslit PTFE/silicone caps help eliminate broken autosampler needles and cored septa. Rugged polypropylene vial houses insert with 450 μL loading capacity and low dead volume (120 μL).

PTFE membrane filters have an excellent chemical compatibility, so they are also used for the filtration of aggressive chemicals, and acids, to which other filter types are not resistant. Due to their hydrophobic characteristics, they must be pre-wetted with ethanol or methanol before the filtration of aqueous media.

Membrane Filters 170 0.01 Micron Membrane Filters 1-800-343-4048 To order EU version that complies with PED, use “EU” as a prefix (Example: EU27 (35). Consult your local distributor; see EU flow rates in table on page 85. 0.01 µm Membrane Filters The GS

The inherently hydrophobic PTFE membrane is ideally suited for the filtration of compressed air and other process gases. The pleat technology maximizes the useful surface area of the filter while maintaining proper flow paths between media pleats.

The Headline Membrane filter consists of a highly porous PTFE membrane in a stainless steel/PTFE housing with two bypass ports and inlet and outlet ports. The ports are designed to allow for permanent pipework, thereby enabling easy maintenance of the filter membrane.

8 列 · Flow Capacity (all) Max Pressure (all) Porosity (all) Used with (all) Product Name (all) Polypropylene Membrane Filters (hydrophobic), 47 mm, 0.45 µm Polypropylene Membrane Filters (hydrophobic), 47 mm, 0.22 µm Nylon Membrane Filters, 47 mm, 0.45 µm Nylon Membrane Filters, 47 mm, 0.22 µm. Split Ratio (all)

Kontes Membrane Filtration Glassware from Restek Joint Sleeve, 40/35 PTFE Filtration:Filter Holders and Hardware Description Ground joint connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers

Filter air and gasses, even at low differential pressures. Sartorius PTFE (Polytetrafluorethylene) Membrane Filters are permanently hydrophobic with low adsorption and excellent chemical compatibility. Choose from four pore sizes in a variety of diameters. Brand: Sartorius 11807--25-----N

For almost 100 years, Auto-Klean, a British company, has been at the forefront of design and development of filter engineering, providing solutions for almost every need. The vast range of fluids handled range from water to highly viscous resins, from liquefied gases to high temperature steam and from liquids under vacuum conditions to high pressure hydraulic oils.

Millex filter units with hydrophobic Fluoropore membrane are ideal for sterilizing gases, venting sterile containers, and sterilizing or clarifying organic solutions. Specialized filter units protect hemodialysis transducers from blood and moisture. 50 mm Millex filter units are also

Hydrophobic PTFE Membrane Filters Highly porous membrance filter. Use to sterilize gasses,vent gas from aqueous solutions,or sterilize or clarify aggressive chemicals. Insert to mostaggressive solvents,strong acids,alcohols,bases,aromatics. Don’t use