There are two connecting forms: luer lock or luer slip. We can supply MCE, PP, PTFE (Hydrophilic or hydrophobic), Nylon (N6 or N66), PES, PVDF, GF(Glass fiber) Membrane Filter. Syringe Filter with differnt Membrane, and Reusable Syringe Filter Holder.

The holders contain PTFE gaskets and O-rings and allow the membrane to be autoclaved in place without the filter sticking to the holder. Read more Luer lock fittings connect to a standard syringe and offer convenience and ease of use for clarification, sterilization*, and removal of particulates from small volumes of liquid (e.g., HPLC samples and solvents).

PTFE Membrane Syringe Filters with pre-filter Type- SYTG mdi SYTG with PTFE membrane and multilayered binder free borosilicate microglassfiber pre-filter provide absolute retention of very difficult to filter colloidal contaminants. These are specially used to filter

Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, with Luer outlet, ethylene oxide sterilized. Comes in a pack of 50. - Find MSDS or SDS, a COA, data sheets and more

Advantec MFS. similar to PTFE resin. The PFA holder offers superior chemical compatibility and can be used with chemically aggressive liquids. Dual support screens allow for flow in either direction. The exterior locking ring ensures quick assembly without tearing the membrane filter

21 列 · Introduction. Microlab Scientific Double Luer Lock (DLL)Syringe Filters provides a high

These Corning® syringe filters have polypropylene copolymer housings, female Luer lock inlets and male Luer slip outlets. Regenerated cellulose (RC) membranes are the best choice for DMSO compatibility. 100% integrity tested, sterile and nonpyrogenic and

Syringe filter have Luer lock fitting. A syringe filters generally consists of a plastic housing with a membrane which serves as a filter. The fluid to be purified may be cleaned by drawing it up the syringe through the filter, or by focusing the unfiltered fluid out through

Female luer lock Female luer lock Outlet connection Male luer Male luer Sterilization Autoclave at 121 C (131 C Max) At 15 psi for 20 min Autodave at 121 C (131 It Max) At 15 psi for 20 min Glass Microfiber pre filtration media 100% borosilcate; MGF-1

General description. Puradisc syringe filters combine premium quality and economy. They are ideal for the quick, efficient filtration of samples up to 100 mL volume. Puradisc filters are produced from pigment-free polypropylene or polycarbonate with standard inlet (female luer lock) and outlet (male luer) connections (unless otherwise stated).

Whatman PolyVENT venting filter Draining or filling of incubators, fermentation tanks, and other vessels requires a venting filter capable of preventing bacterial contamination. With an integral PTFE filter membrane, Whatman PolyVENT acts as an industrial air filter media for sterilization* of gases entering bioreactors such as fermentation tanks.

Syringe Filter Specification Membrane material PTFE Pore size 0.22μm Wettability Hydrophobic Housing Material Polypropylene Inlet/Outlet Female Luer Lock inlet and Male Luer slip outlet Burst pressure(psi) 87 Filtration area(cm2) 0.92 µl) <10 <10

All units contain PTFE filter membranes in plastic housings with Luer lock inlet and Luer slip outlet fittings. Units smaller than 25 mm diameter are specifically designed to minimize hold-up in filtration of small volumes. The 3-4 mm units are recommended for volumes of <1 mL; the 13 mm units are recommended for volumes of 0.5-10 mL.

There are two connecting form for syringe filter, one is luer lock, another is luer slip. We can supply MCE, PP, PTFE (Hydrophilic or hydrophobic), Nylon (N6 or N66), PES, PVDF, GF (Glass fiber) Membrane Filter. Syringe Filter with differnt Membrane, and Reusable Syringe Filter Holder.

Syringe Filter. ₹ 1,400/ No Get Latest Price. We provide our clients with syringe filter, a single-use filter cartridge. This filter is attached to the end of a syringe and may or may not have luer lock fittings. Moreover, it also has a needle can be fitted to the end of the syringe as per requirement.