Some particles smaller than the stated pore size may be retained by other are reverse phase solvent cast membranes, where controlled evaporation or ...

What membrane filter pore size should I use for sterilization? Nylon and PTFE (Teflon) membranes have broad chemical compatibility and can be used.

25 mm Acrodisc® PF Syringe Filters with 0.8/0.2 µm Supor · 13 MM SYRINGE FILTERS, PTFE WITH TUBE TIP, 0.2 UM PORE SIZE.

Solvent Membrane Filter found in: Fluoropore™ PTFE Membrane Filters, with low tare mass Zefluor™ membrane, available in 0.5 μm pore size Ideal for ...

Nylon Membrane - 0.2µm Pore Size - Hydrophilic - 500ml Capacity. Disposable Bottle Top Filter-Degassing Unit for HPLC solvents saves time while producing 

Results 1 - 30 of 52 This is a 18 mm Hydrophobic PTFE Membrane Filter with a 0.45 micron pore size. For use in Sterilizing filtration, bioassays, solvent ...

a high viscosity if standard syringe filters are used. ReliaMAX™ includes high quality nylon membranes available in. 0.2 µm and 0.45 µm pore sizes for 

PP (polypropylene) membrane syringe filters are hydrophobic, high solvent These Syringe Filters have a 25mm diameter and come in two pore sizes, ...

Find Syringe filters (PTFE, Nylon, and Regenerated Cellulose) spin filters, AF0-0501, Phenex, Phenex™ Nylon Filter Membranes, 0.20um pore size, ...

Sep 28, 2016 Syringe filters normally use membrane type filters which have a specific ... Filter body; Pore size; Filter material; Filter capacity ...

Choose the porosity of the filter based on the size of potential particulates Choose the membrane type based on the solvent that you want to filter.

Filters with 0.2 μm pore sizes are validated by Resistant to almost all solvents (see list above) ... Hydrophobic PTFE Membrane Filters, Type 118,.

Extensive pore size specification. - Cell retention and particle collection. Application. - Filtration for aqueous sample and some organic solvents.

The membrane disc filters are available in 0.22µm or 0.45µm pore sizes. The Hydrophobic PTFE membrane is bonded to a polypropylene support and due to its