Cartridge Filter Housings The housing catalog number is made up of several variable characters i.e. length, material, port size, and O-ring material. For example: Natural Polypropylene Filter Housing, for 20” Filter Cartridge Length, 2-222 Filter Connection, 3/4

A Identification Membrane type and pore size are clearly marked on individual syringe filters B Luer Lock Inlet Tip Secures connections to prevent "blow off" C Sample Distribution Rings Creates even sample distribution for high sample flow rates D Medical Grade Polymer Housing

Clear & White PP Housing. MS’s clear polypropylene filter housings are ideal for use in all industries where filtered liquids must remain totally free of contamination. These housings are especially essential in the semi-conductor, pharmaceutical and chemical processing industries. They are constructed entirely of PP (polypropylene) and AS

Useful for alcohols, cryoprotectants such as DMSO and with aqueous/biological and weak solvents. Polypropylene housings with pink color rings. PTFE. Naturally hydrophobic. Excellent for HPLC/GC solvent filtration. Ideal for sterile venting of air or other gases during filtration. Polypropylene housings with white color rings.

PTFE (Membrane), Polypropylene (Housing) (3) PTFE membrane (1) PTFE-coated Silicone Rubber Septa (2) PVDF (16) PVDF (Hydrophilic with 1.0μm GF B Prefilter) (1) PVDF (Hydrophilic

Designed for daily routine analysis. Aijiren Techbrand Non-sterile PTFE Syringe Filter features a hydrophobic PTFE membrane for filtering HPLC organic solutions. Available in two membrane diameters (13 and 25mm) and two (0.2 and 0.45µm) pore sizes.

Housing is made of medical-grade polypropylene (PP) and offer luer lock inlet/slip outlet connections, unless otherwise indicated. High Pressure Column Protection and Fittings 4 mm diameter 15 diameter 25-28 mm diameter ≤ 2 mL Sample Volume 2 - 10 mL

PTFE membrane polypropylene housing sterility non-sterile packaging pack of 50 manufacturer/tradename Whatman 6784-2504 Whatman Article No. 28420306 (US reference) diam. 25 mm filtration area 4.2 cm 2 volume ≤100 mL pore size 0.45 μm fitting Visit

Materials: Membrane Hydrophobic and hydrophilic PTFE Support Polypropylene Sleeve, caps, core Polypropylene Housing Polypropylene Retention rating: 0.1, 0.2, 0.5, 1, 3, 10 µm Maximum operating conditions: Maximum forward differential pressure 0.42

CHM® SVT venting syringe filters are reusable units that contain a reinforced PTFE membrane with polypropylene gauze, in a polypropylene housing. These units are easily connected to fermenters or containers The large filtering surface (20 cm2

NALGENE 13mm Syringe Filters, polypropylene housing, PTFE membrane. Item Added to Cart

Choose a filter or membrane based on: 1) Chemical compatibility of the membrane and housing with your sample matrix. 2) Size and amount of particulates in the sample. 3) Potential interactions (binding) between the membrane and sample components. 4) Special considerations such as requirement for prefilter or inorganic ion certification.

Housing is made of medical-grade polypropylene (PP), and offer luer lock inlet/slip outlet connections, unless otherwise indicated. 1. Select filter diameter based on sample volume 2. Select pore size based on the nature of your sample and chromatographic l l

2018/8/7 · Membrane-sample Compatibility It’s easy to overlook membrane compatibility when picking out your filter or device for your sample filtration. Good membrane-sample compatibility supports efficient filtration and minimizes resistance, while poor compatibility might result in backpressure, ineffective filtration, or even chemical attack of your membrane, leading to contamination of your filtrate.

Part Number: . Captiva Econofilter, polypropylene housing, polytetrafluoroethylene (PTFE) membrane, 13 mm diameter, 0.2 µm pore size, 1000/pk. Add to Favorites. + Create New list. Item successfully added to your list.