PTFE is the 'ultimate' regular fiber as it has outstanding chemical and thermal resistance, with the right chemistry, it will operate up to 250°C. Two forms of the fiber are used in filtration applications: Brown - which is very much like a traditional textile fiber in appearance was the original PTFE fiber sold as Teflon.

0.05 Micron, PTFE Membrane Pleated Cartridge, 1.0″ID x 2.65″OD x 40.0″Long, Polypropylene Inner & Outer Core, 226/Fin Ends, Silicone O-Rings. Packed 6 per box (Sold in box qty only). Priced per each. Meets FDA Title 21 for Food Contact Applications.

Power generation. In the world of power generation, many high-speed rotating parts are used. These parts often have a very dry lubricating oil reservoir. The lubrication oil is a crucial step in the process, whereby the right choice of filter is extremely important. There are also lots of other applications within this industry in which

Membrane Filters Graver Product Media Hardware Retention Ratings (μm) Efficiency Citadel PTFE PFA 0 05, 0 1, 0 2, 0 45, 1 Absolute TefTEC PTFE Polypropylene 0 05, 0 1, 0 2, 0 45, 1 0 Absolute TefTEC V PTFE Polypropylene 0 2 Absolute WaterTec Polyethersulfone Polypropylene 0 05, 0 1, 0 2, 0 45, 0 65 Absolute

The e-PTFE membranes are recognized as the principal tested membranes for GTR, especially Gore-Tex®. Reinforced Gore-Tex® membrane is e-PTFE reinforced with titanium. These e-PTFE membranes are available in various forms, thus they can properly maintain the space to be regenerated, and in case of exposure they are easily removed.

The single layer PTFE membrane, with over double the hydrophobicity of polypropylene or PVDF, is the best choice to prevent water intrusion and resulting microbial growth. Each PTFE cartridge is integrity tested during manufacturing and is supported by a validation guide for regulatory compliance.

The company traces its roots back to Germ Oils of the UK, and commenced business in South Africa in 1905. The company was incorporated in South Africa as a public company in 1938, with the parent company, Germ Oils of the UK, as its major shareholder.

These housings are especially essential in the semi-conductor, pharmaceutical and chemical processing industries. They are constructed entirely of PP (polypropylene) and AS (acrylonitrile) plastic material that under the FDA standard of food grade without color, adders, fillers, reinforcements or lubricants. In critical applications, these all natural housings insure pure, cost effective filtration of a variety of solvents, acids, alcohols and chemicals without leaching or bacterial build up.

• Power Generation TefTec PTFE Polypropylene 0.05, 0.1, 0.2, 0.45, 1.0 Absolute ... hydrophobic PTFE membrane and polypropylene support layers and components ...

High-purity polypropylene and hydrophilic PTFE provide an economical alternative for the filtration of various MiE chemicals. The hydrophilic nature of the PTFE membrane does not require pre-wetting for aqueous based liquids typically necessitated with standard PTFE membranes. This can reduce total operating cost and improve process up-times.

High Flowment Cartridges. PP Pleated and glass fiber cartridges are designed for higher filtration area & high throughput. It has 6 inch/152mm large diameter, is coreless, single open-ended structure with an inside to outside flow pattern.

The Proflow™II-E filter cartridge uses a PTFE membrane along with high-purity polypropylene supports that provide an economical alternative to all-fuoropolymer cartridges. It provides a high degree of retention and cleanliness along with good fow and lifetime. This filter is ideally suited for ultrapure microelectronics fuids and gases.

Acro® 50 Vent Devices with PTFE Membrane. 50 mm Filters with Superior Performance for Demanding Applications. Reusable and autoclavable. PTFE membrane and polypropylene housing have broad chemical resistance. Large surface area provides greater throughput and high air flow rate. Available with a variety of inlet and outlet connectors.

Description. Membrane Material: Polytetrafluoroethylene (ePTFE) Support Material: Polypropylene (PP) Sealing： PTFE membrane can be laminated to various support materials by heating，and no adhesive, surface active agent are used during the production of membrane. Environment: produced and tested in clean room of10,000 class and all relevant staff must wear clean clothing as required.

Description MS ® PTFE hydrophilic membrane with polypropylene supports achieve excellent performance in liquid filtration,especially the aggressive liquid.Because our membrane has higher porosity,higher flow rate and superior filtration precision.