PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. Descriptions Aijiren disposable syringe filter devices are designed to

The Xiboshi syringe filters are specifically designed for high particulate loaded samples. Constructed of a pigment-free polypropylene housing with a prefiltration stack of PP Polypropylene fiber 1um and Glass microfiber media 1um, these filters eliminate sample contamination and allow you to filter even the most difficult samples with less hand pressure.

Syringe filter PTFE 30mm Diameter, .45um Membrane with Polypropylene Housing, Bulk-Packed, Non-Sterile, 100/CS CT229780 Now: $220.00 $181.00

Membrane Type Application Cellulose Acetate Very low protein retention. Glass pre-filter와 함께 사용시 Tissue culture media 또는 general biological 샘플 filteration에 적합 . 대부분 용매에 약함 Polypropylene(PP) 대부분 모든 HPLC, GC 샘플 전처리에 적합.

Chemical compatibility is a critical consideration when selecting the proper sample prep syringe filter for your application. This chart outlines the chemical compatibility of the most common syringe filters. The contact time was 24 hours at 20 C. Syringe Filter

Polypropylene (PP) membrane filter is the preferred filter membrane for HPLC applications where the detection levels are below 230 nm. The filters also exhibit negligible protein binding, which is essential for maximum sample recovery of critical, small volume protein samples. Because of their hydrophobic nature, the polypropylene membrane are

membranes in either polypropylene or acrylic copolymer housings. The larger 50 mm diameter disc filter has a PTFE membrane and polypropylene housing with hose barb connectors. This product is ideal for filtering aggressive solvents or gases and applications

membrane filter, clogging of the membrane filter is prevented and sample clean up is optimized. Outlet connection is luer lock. AF0-8515-12 7 100/pk AF0-8515-52 7 500/pk 1. 17 mm diameter. 2. Glass fiber filters are 28 mm diameter and made of borosilicate.

14 Phenomenex Centrifugal Filters Phenex Disposable Centrifugal Filter • Convenient filtration of multiple HPLC and GC samples • High recovery for small samples • ®Nylon, PTFE (Teflon) and Cellulose Acetate membrane materials Phenex disposable

Filter Membranes ordering information. (1) Above syringe filters are non-sterile. Syringe filters with polypropylene housing and nylon or Teflon membranes (17 or 30 mm ID only) can be autoclaved. Any filters with acrylic housing or any 4 mm ID filter with

2018/8/7 · Membrane-sample Compatibility It’s easy to overlook membrane compatibility when picking out your filter or device for your sample filtration. Good membrane-sample compatibility supports efficient filtration and minimizes resistance, while poor compatibility might result in backpressure, ineffective filtration, or even chemical attack of your membrane, leading to contamination of your filtrate.

Syringe Filter Membrane : Nylon/PTFE/PES/MCE/ PVDF/ CA Syringe Filter Diameter (mm) :13mm & 25mm PTFE Syringe Filter Polypropylene Housing 3.PES Syringe Filter Part No. FS1322 FS1345 FS2522 FM2545 Description Pore Size: 0.22um ...

SYRINGE FILTERS Ordering Information1 1. Larger quantity purchases at significant savings are available. Additional dimensions and membrane types are available. Please contact your local Phenomenex technical consultant or distributor for availability or

Materials: Membrane Hydrophobic and hydrophilic PTFE Support Polypropylene Sleeve, caps, core Polypropylene Housing Polypropylene Retention rating: 0.1, 0.2, 0.5, 1, 3, 10 µm Maximum operating conditions: Maximum forward differential pressure 0.42