Membrane Disc Filters - The nonwoven polypropylene prefilters (with nominally-rated pore sizes) are constructed with 100% polyprop Hydrophobic membrane filters are necessary for applications where the membrane is used to retain liquid water while allowing gases

Membrane Material: Polytetrafluoroethylene (ePTFE) Support Material: Polypropylene (PP) Sealing： PTFE membrane can be laminated to various support materials by heating，and no adhesive, surface active agent are used during the production of membrane. Environment: produced and tested in clean room of10,000 class and all relevant staff must

PTFE membrane with supporting layer polyester or polypropylene can effectively filtrate microorganism and other particulates; Membrane Solutions PTFE membrane is available in different diameters, pore size and packing depend on your quantity; can be

All filters can be autoclaved at 121 C and 1.1bar for 30min. Chromafil Xtra: Labelled for method validation and certification. Colour-free plain polypropylene housing. Imprint for direct identification of the membrane type, diameter and pore size. A hydrophobic

Description: PTFE Absolute Rated Membrane Filter Cartridges Polytetrafluoroethylene (PTFE) membrane filter cartridges constructed in polypropylene hardware for a wide range of industrial applications Absolute retention from 0.1 to 1.0 microns Outstanding hydrophobicity

Polypropylene Prefilter, hydrophobic. MilliporeSigma. Polypropylene prefilter constructed of 100% virgin polypropylene media. This filter is ideally suited for general clarifying & prefiltration applications including solvents, deionized water & bioburden reduction. Related Products: Polypropylene Filters. Compare this item.

Attributes Values Material Of Construction Filter Media: PTFE on a polypropylene support Housing: Polypropylene Filter Diameter 37 mm Effective Filtration Area 7.5 cm 2 Typical Air Flow Rate 3.6 Lpm @ 0.2 bar (3 psi) Dimensions Overall Length: 5.3 cm (2.1 in.)

Multi-Purpose Filter for Small-Volume Venting and Gas Filtration PTFE membrane and polypropylene housing have broad chemical compatibility Disposable - Eliminates the cost and labor associated with disc-loaded stainless steel filter holders Autoclavable

The ultimate filter for removing liquids is a PTFE based membrane. These membranes allow gases to pass while blocking larger liquid molecules. We offer a comprehensive line of membrane separator holders that are used to protect analyzers.

PTFE Membrane Filters, Aspire Laminated, Oleophobic, Polypropylene Backer, 0.45 Micron, 200x250mm, 5/Pk Product code 0QL8272005 The pores of microporous membrane filters act as small capillaries. When hydrophilic membranes come into contact with

Memflo, PTFE filter cartridges, are constructed from a PTFE membrane and Polypropylene core, outer cage and big bore inner dia. end caps which provide excellent flow rates, long service life and minimal extractable. The materials of superior chemicalSterile

Disposable Syringe Filters featuring: Polypropylene housing Leur-Lok and pressure fitting Convenient color coding system Broad filter material selection Ultrasonically bonded for reliability Polytetrafluoroethylene (PTFE) PTFE membranes are hydrophobic; thus they are

Membrane filters Diameter 25 mm 37 mm 46.2 mm 47 mm 50 mm Membrane type Pore size Product code Product code Product code Product code Product code Quantity PM 2.5 PTFE membrane 2 μm – – 7592-104 – – 50/pack TE type PTFE membrane 0.2

Filter aggressive chemicals, including acids and non-aqueous solvents, such as those used in GC and HPLC with the Aijiren Tech Nalgene 50mm Inline Syringe Filter with PTFE membrane. Also for sterile filtration of air and gases. Provides an excellent

Description For tissue culture and HPLC applications. Polypropylene housing. Diameters: 25 and 50mm diameters handle volumes ranging from 0.5 to 100mL 50mm diameter PTFE syringe filter is ideal for protecting vacuum lines and pumps PTFE resin (PTFE): For