Minisart® HY Syringe Filters, Sartorius. Minisart® HY with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 to 12. The low-binding PTFE membrane is the best option for leachable free filtration.

Individually packed and sterile Minisart ® Air syringe filters are optimal for immediate usage whenever sterile filtration or venting is needed. The low-binding PTFE membrane is the best option for leachable free filtration. Due to its hydrophobic nature the PTFE membrane functions as a water barrier and does not become wetted by aerosols.

Nov 16, 2021 · Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Pricing and Availability.

Nov 09, 2021 · Acrodisc® 13 mm Syringe Filter, 0.2 µm PTFE Minispike Outlet Sample filtration using syringe filters containing 0.45 μm (HPLC) or 0.2 μm (UHPLC) pore size membranes will also extend the life of chromatography columns by preventing particulate from blocking the flow path between the column packing.

Minisart filtration unit, 0.2µm, sterile with male luer slip outlet, individually wrapped. Minisart Syringe filter holders for rapid small volume sterilization, ready-to-use units, which offer high flow rates at low inlet pressures and make a correspondingly rapid sterile filtration possible.

Minisart ® Syringe Filters: The Easy Choice – Clean and Safe For sterilization of liquids, sterile filtration with Minisart ® syringe filters is the optimal solution. They remove all microorganisms and particles reliably, without any influence of their ingredients, due to adsorption or decomposition.

Minisart® SRP (Hydrophobic PTFE) 25 mm PTFE PP 0.2 µm Male Luer Slip White, Printed Yes 50 17575-----ACK 25 mm PTFE PP 0.2 µm Male Luer Slip White, Printed No 50 17575-----K 25 mm PTFE PP 0.2 µm Male Luer Slip White, Printed No 200 17575-----S 25 mm PTFE PP 0.2 µm Male Luer Slip White, Printed No 500 17575-----Q

DOE 222 226 pleated filter cartridge/PP micro filtration membrane The Polypropylene (PP) membrane filter has high flow rate and dirt holding capacity, 100% quality polypropylene construction with excellent chemical compatibility, It's thermally bonded construction ensures minimal extractable and its high filtration efficiency makes it an excellent choice for use in various industrial

Minisart® RC 25 Contains a regenerated cellulose (RC) membrane ensuring the lowest non-specific binding. Minisart® SRP 15 Has a PTFE membrane for the highest chemical compatibility and a pH range from 1 to 14. Minisart® NML The surfactant-free cellulose acetate membrane is perfect for aqueous liquids.

Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Simple, rapid and reliable ultracleaning. Feature a coating-free, hydrophobic PTFE membrane that is chemically inert.

Unm High Quality Ptfe Solar Module Pharmaceutical Filter Film Eptfe Bubble Point Membrane , Find Complete Details about Unm High Quality Ptfe Solar Module Pharmaceutical Filter Film Eptfe Bubble Point Membrane,Ptfe Pharmaceutical Filter Film,Ptfe Solar Module Film,Eptfe Bubble Point Membrane from Plastic Sheets Supplier or Manufacturer-Suzhou Unique New Material Sci. & Tech. Co., Ltd.

Our coating-free hydrophobic PTFE membrane used in Minisart® SRP is suitable for venting applications as well as the leachable free clarification of very harsh chemicals. In addition Minisart® PES offers a combination of hydrophilic PES membrane and PP housing and has a higher chemical compatibility than PES in MBS housing.

Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Simple, rapid and reliable ultracleaning. Feature a coating-free, hydrophobic PTFE membrane that is chemically inert.

EXW price 0.22 um PTFE filter for metals Syringe Filters – Sigma-Aldrich Medical Millex-GP Syringe Filter Unit, 0.22 µm, polyethersulfone, 33 mm, sterilized by gamma irradiation, A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane.

Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Simple, rapid and reliable ultracleaning . Feature a coating-free, hydrophobic PTFE membrane that is chemically inert