Standard inlet and outlet luer connectors. Optional sterile, medical-grade blister pack. Tube-tip format (optional) for accurate dispensing into a micro-vial. Choice of membrane or glass microfiber filter media. Sterile option for critical applications. Wide range of membranes. 13 mm diameter syringe filter. Sample volume up to 10 mL.

Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17573 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version K is a non-sterile pack of 50. Units can be sterilized by autoclaving or EO.

Sartorius Minisart HY Syringe Filter - MINISART, HY, PTFE, 0 This item may require 5-7 days to ship out from our facility.Product Information: MINISART, HY, PTFE, 0.2UM, 26MM, ETO STERManufacturer Part # 16596-----HYKDescription Minisart HY Syringe Filters Minisart HY for fast and reliable sterile venting and gas filtration Handy and readily

Sartorius Minisart 0.2 um Syringe Filter, PTFE 17575-----S. Sartorius authorized distributor . ☎ +1 (838) 222-2032 Mon-Fri 8:00 AM - 5:00 PM ET or order online 24/7

polypropylene housing 0.2 um syringe filter Minisart Syringe filter Minisart® NML Plus, Glass-fibre / Cellulose acetate (GF High quality range of Syringe filter Minisart® NML Plus, Glass-fibre / Cellulose acetate (GF / CA) Sartorius Minisart-plus Syringe Filters 0.2µm 17823-K

Minisart Plus filtration unit, 0.2µm, with glass fibre pre-filter sterile with male luer lock outlet, individually wrapped. Minisart Syringe filter holders for rapid small volume sterilization, ready-to-use units, which offer high flow rates at low inlet pressures and make a correspondingly rapid sterile filtration possible.

Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17573 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet and version ACK is individually packed and sterilized by ethylene oxide (EO).

General description. Minisart filters have a Luer Lock inlet and outlet, for positive attachment to the syringe. The filter is 26 mm in diameter with a hold-up volume of 0.1 mL. Suitable for clear aqueous solutions not requiring preliminary filtration.

Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17575 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version Q is a non-sterile bulk pack. Units can be sterilized by autoclaving or EO.

Minisart® Syringe Filter, Polytetrafluorethylene (PTFE), Pore Size 1.0 µm, Non-Sterile, Female Luer Lock, Male Luer Lock, Pack Size 500 Added to Shopping Cart Minisart ® HY with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12.

Products. 1-4mL Autosampler Vials for HPLC, UPLC, GC 16mm, 25mm Test Tubes for Water Analysis 6-20mL GC Headspace Vials Minisart ptfe syringe filter hplc factory

Products . 1-4mL Autosampler Vials for HPLC, UPLC, GC . 16mm, 25mm Test Tubes for Water Analysis Home » News » HPLC Syringe Filter » Minisart 0.2 um ptfe ...

Minisart-Plus Filters - An integral glass fiber prefilter greatly reduces the clogging associated with typical disposable syringe filtration units. Cellulose acetate filters, 26mm in diameter, with 0.2 μm, or 0.45 μm pores. The Minisart-Plus have a hold-up volume of 0.1mL. Sterile; individually packaged.

Description. Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Simple, rapid and reliable ultracleaning.

Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17575 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version S is a non-sterile bulk pack. Units can be sterilized by autoclaving or EO.