Omnipore Membrane, PTFE, hydrophilic, 0.2 µm, 47 mm, white, plain: 背景信息: Our Fluoropore™ membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications.

This 25 mm Millex® syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in fine particle removal from organic solvents. Syringe filter consists of a membrane sealed in a high density polyethylene housing Filter is non-sterile,

Our Omnipore™ membrane is a hydrophilic PTFE membrane that is compatible with virually all solvents, acids, and alkaline solutions. Features & Benefits: - Biologically and chemically inert. - High porosity yields high flow rates. - Hydrophobic and hydrophilic PTFE varieties available for filtration of aqueous and organic-based samples.

Iso900 ptfe membrane filter 0.2 um for hospitals Quality pp 0.2 micron filter For Fresh and Clean Air - Alibaba.com Nylon PTFE MCE PP PVDF Membrane Filter 0.2 Micron 0.45 micron Paper Ready to Ship Up to 5 years warranty $0.49-$0.60 / Piece 00 Pieces (Min. Order) $0.20 /Piece Guangzhou Ikeme Technology Co., Ltd.

Opticap® XL and XLT capsule filters eliminate the time and expense associated with assembling, cleaning, and validating stainless steel housings. - Find MSDS or SDS, a COA, data sheets and more information.

Mitex™ PTFE Membrane is unaffected by almost all liquids, including organic solvents, concentrated acids and bases, propellants, and cryogenic fluids. Mitex™ membrane is unbacked, yet is easy to handle, combining the convenience of a backed membrane with the versatility of a pure PTFE membrane. Mitex™ membrane is hydrophobic.

Physicochemical Information. Pore Size. 0.2 µm. Bubble Point at 23 °C. ≥ mbar (16 psig) nitrogen with 70/30 % IPA/water. Gravimetric Extractables. The extractables level was equal to or less than 10 mg per 4-inch cartridge after 24 hours in a 70/30% IPA/water mixture at controlled room temperature. HydroCorr.

Fluoropore™ Membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support. (Catalogue numbers containing ""FHUP"" have no backing.) Fluoropore™ Membranes provide broad chemical compatibility, high flow rates and consistency. Omnipore™ Membrane is hydrophilic PTFE compatible with

JGWP04700 Millipore Omnipore Membrane Filter Download Zoom 0.2 um pore size, Hydrophilic PTFE membrane, 47 mm diameter Omnipore Membrane Filter MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. Technical Information Data Sheet JGWP04700 100 pack, 0.2 µm, 47 mm, white, plain

LSWP04700. Trade Name. Mitex. Description. Mitex Membrane Filter. Background Information. Mitex™ PTFE Membrane is unaffected by almost all liquids, including organic solvents, concentrated acids and bases, propellants, and cryogenic fluids. Mitex™ membrane is unbacked, yet is easy to handle, combining the convenience of a backed membrane

Membrane filters, syringe filters, capsule filters, mesh filters - Low Cost Membrane Filters PVDF Membrane Filters. PVDF (polyvinylidene fluoride) is a hydrophobic, solvent resist

Certified ptfe membrane filter 0.2 um Millipore-Voa Vial Omnipore Membrane, PTFE, hydrophilic, 0.2 µm, 25 mm, white, plain: 背景信息: Our Fluoropore™ membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal

All three of these membrane filtration processes are effective methods of treating water that cannot be treated . Membrane wettability: For liquid filtration, a membrane must be wettable . In addition to the 0.22 um pore size Nylon membrane filter, there are 0.1m, 0.22m, 0.45m, 0.8m, 1.0m, 3.0m, 5.0m, 10m .

Cheap ptfe 0.2 micron filter Millipore-PTFE Membrane Filter SLFG75010 Millipore Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mmDescription. Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm. Background Information.

2 Bubble point of Fluoropore measured with methanol, Mitex. 3 Fluoropore with methanol; Mitex and LCR with water. For Omnipore 100 mL water, 20°C, 47 mm disk, 8.97" Hg vacuum. 4 Air flow rates for Mitex are for the number of seconds for 100 cm 3 of air to pass through 1 in 2 of membrane (Gurley test)