Non-Sterile. Choose the membrane type of syringe filter that meets your laboratory's specific application which includes: Hydrophobic PTFE membrane filters are designed for particle removal and preparation of organic solvents prior to chromatography analysis or other instrument analysis.

Millex™ Filters: Inlet and Outlet for Latex Tubing are constructed of sturdy polypropylene with hydrophobic PTFE membranes. Available in 0.2, 0.45 and 1.0µm pore sizes. Stepped hose barb with female Luer slip interior; Polypropylene housing with Fluoropore™ hydrophobic PTFE membranes; Nonsterile, autoclavable and bidirectional

SLFG025NK. MilliporeSigma. This 25 mm Millex® syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in fine particle removal from organic solvents. Syringe filter consists of a membrane sealed in a high density polyethylene housing Filter is non-sterile,.

This 33 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses.

Millex-GP filters are recommended for sterile filtering protein solutions, tissue culture media, buffers and additives. Millex filters with Durapore® (PVDF) membrane are the lowest protein-binding syringe filters available. Use them to filter protein solutions. The 0.2 µm filters are sterilizing grade.

Protect vacuum sources and tank/bioreactor venting from contamination and moisture damage. Millex™ Filters: Inlet and Outlet for Latex Tubing are constructed of sturdy polypropylene with hydrophobic PTFE membranes. Available in 0.2, 0.45 and 1.0µm pore si

filters. These syringe filters are recommended for filtering 1–10 milliliter (mL) volumes to remove particles prior to instrumentation analysis. The single-use, disposable filter removes particles larger than the membrane’s rated pore size. The Millex® syringe filter consists of a membrane sealed in a polypropylene housing.

MilliporeSigma™ Millex™ LG Syringe Filter with Hydrophilic LCR PTFE Membrane. Designed for sample preparation and low protein binding fine particle removal from solvents, aqueous and organic solutions. Millex™ LG Syringe Filters with Hydrophilic LCR PTFE Membranes are for non-sterile filtration. Manufacturer: MilliporeSigma™ SLLGH25NK.

Devices Stericup® filters, Millex® syringe filters, MultiScreen® plates, filter discs Mitex™ Membrane Brand Name Mitex™ Membrane Membrane Material Hydrophobic Polytetrafluoroethylene (PTFE) Pore Sizes (µm) 5 - 10 Thickness (µm) 125 - 200 Water Flow (mL/min/cm2 @27.5 in. Hg 47 to greater than 125 Air Flow (L/min/cm2) @ 10 psi 117 - 167

Mitex Membrane Filter: Background Information: Mitex™ PTFE Membrane is unaffected by almost all liquids, including organic solvents, concentrated acids and bases, propellants, and cryogenic fluids. Mitex™ membrane is unbacked, yet is easy to handle, combining the convenience of a backed membrane with the versatility of a pure PTFE membrane.

0.2 μm filters are sterilizing grade. Include a Certificate of Quality. Millipore Express™ (PES) membrane. Provides a unique combination of speed and six times less protein binding than competitive polyethersulfone membrane. For sterile filtering of protein solutions, tissue culture media or aqueous solutions. Gamma irradiation sterilized.

Millex® Syringe filters set the standard for reliable small volume filtration (1 mL to 200 mL). Available in 4, 13, 25, 33, and 50 mm diameters. Minimal hold-up volume for less sample loss o f small volumes and are ideal for solutions such as antibiotics and tissue culture additives.

Millex™ Filters: Inlet and Outlet for Latex Tubing are constructed of sturdy polypropylene with hydrophobic PTFE membranes. Available in 0.2, 0.45 and 1.0μm pore sizes. Stepped hose barb with female Luer slip interior. Polypropylene housing with Fluoropore™ hydrophobic PTFE membranes. Nonsterile, autoclavable and bidirectional.

MilliporeSigma SLFA05010 Millex® FA Syringe Filter, 1µm PTFE Membrane, 50mm Diameter, Autoclavable (Pack of 10) Javascript is disabled on your browser. To view this site, you must enable JavaScript or upgrade to a JavaScript-capable browser.

Hydrophilic PTFE membranes have broad chemical compatibility, enabling filtration of aqueous and organic solvents. 33 mm hydrophilic PTFE Millex™ filters have faster flow rates than 25 mm filters. Easy to read membrane type and pore size printed on every Millex™ filter. Over-molded design provides excellent seal integrity and burst strength.