Ptfe Filter Holder found in: Chemically Resistant PFA In-Line Filter Holders, Stainless Steel Vacuum Manifold, Low-Pressure CPI Inlet Filter for Mobile.. contamination under vacuum. The holder utilizes a 25mm filter membrane. The anodized aluminum clamp

More Firm connection: Luer Lock Male/Female Higher Operating temperature: Polycarbonate housing material tolerates up to 110℃ with PTFE membrane, up to 90℃ with PVDF membrane. Sterile: Pre-sterilized by Gamma radiation and individually package can be offered.

Connections at both sides of the filter with luer lock fittings Available with different tubing diameters: 2.0 x 4.1 mm (PVC, DEHP-free) or 3.0 x 4.1 mm (PVC-free) Total set length: 31 cm

Connectors: Inlet: female luer lock (FLL) Outlet: male luer lock (ML) Sterilization*: Autoclave at 121 C at 15 psi for 20 minutes Biosafe: Polymer grade and membrane types meet the USP test requirements (for class VI plastics) Filter media: See chart on last

Membrane Solutions’new 17mm syringe filters have color-coding housings providing easy identification of membrane and porosity. Their enhanced luer-lock inlet provides secure connections and eliminates filter 'blow-off'. 17mm syringe filters supplied Nylon, PTFE

PTFE Syringe Filters, 0.22 um, 25mm, Double Luer Lock, PP Housing, Nonsterile, 100 per pack TSH-SPEC16251. $143.99. Ideal for laboratory small volume samples clarification and particles removal.Features and Benefits Easy to use Wide range of filter media Applicable to samples below 80mL Disposable design Quality Filters produced in a controlled

21 列 · Review Hamilton Company's syringe disinfecting and sterilization guide. Hamilton provides a

Syringe filters for aqueous solutions are available in diameters of: 4mm, 13mm, 17mm, 20mm, 25mm, 30mm, and 33mm. Here’s a guide to help you choose your syringe filter size: 4 mm filters – for small volume samples less than 1 ml. 13 mm filters – for sample volumes between 1 and 10 ml. 17 mm filters – for sample volumes greater than 10 ml.

MKP Series PTFE Filter Capsules MKP sterilizing grade capsules were designed for small-scale filtration, clarification, and filling Male Luer Lock Ethylene Oxide Sterilization (ETO) 60 mm Materials of Construction Media: Pharmaceutical Grade PTFE ...

Millex Syringe Filter, Fluoropore® PTFE, Hydrophobic, Non-sterile 0.20 µm pore size, 25 mm diameter, Millex-FG hydrophobic PTFE membrane, for gas filtration and venting applications; find Millipore-SLFG02550 MSDS, related peer-reviewed papers, technical

The filter diameter is 13mm. If you buy a PTFE syringe filter, a pack contains 100 pieces and is packaged in polythene boxes that are of the low dust type. The polythene box packaging decreases dust levels in clean-room areas. The luer lock attachments are

Nonsterile PTFE syringe filter, 0.22(μm), 4(mm) ,Hydrophobic, 200pk IWT-ES10604 Nonsterile PTFE syringe filter, 0.45(μm), 4(mm 87 psi (Housing only, also dependent on membrane) Inlet: Luer lock female Outlet: Luer slip male 17mm diameter syringe filter: ...

Whatman PolyVENT venting filter Draining or filling of incubators, fermentation tanks, and other vessels requires a venting filter capable of preventing bacterial contamination. With an integral PTFE filter membrane, Whatman PolyVENT acts as an industrial air filter media for sterilization* of gases entering bioreactors such as fermentation tanks.

Acrodisc Syringe Filters with PTFE Membrane, 13 mm 4423 0.2 µm, male slip luer outlet 100/pkg 300/cs NA 0 4542 0.2 µm, male slip luer outlet 1000/pkg NA 0 4422 0.45 µm, male slip luer outlet 100/pkg 300/cs NA 0 4543 0.45 µm, male slip luer outlet 1000

Example: MKPF020CLFLF (Mini capsule, 0.2 μm PTFE membrane with 400 cm2 EFA, female Luer Lock inlet/outlet, and two Luer lock vent/drain) Customer adapters are available upon request. Saint-Gobain Performance Plastics Filtration Technologies 50 W