High Filtration Efficiency Hydrophobic PTFE Membrane BTH Pleated Filter Cartridge for Gas/vent Sterile Filtration offered by China manufacturer Hangzhou Darlly Filtration Equipment Co.,Ltd.. Buy High Filtration Efficiency Hydrophobic PTFE Membrane BTH Pleated Filter Cartridge for Gas/vent Sterile Filtration directly with low price and high quality.
Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common
•The extensive chemical compatibility of hydrophobic PVDF(Polyvinylidene Fluoride) membrane makes the filter element suitable for filtration of various acid and base solutions. •Integrity testing before shipping out from our factory to ensure it with high quality.
Jul 09, 2019 · The surface filter membrane is a hydrophobic PTFE membrane with no support. It can be used under extreme chemical or temperature conditions (up to 260°C) that other membranes cannot withstand. Hydrophobic PTFE membrane filter can be used for atmospheric filtration detection, usually only for air filtration.
Hydrophobic PTFE syringe filters 25mm Diameter 0.22μm Pore Size For Industrial Filtration by KS-Tek Biotechnology (PACK OF 25) FEATRURE: Hydrophobic PTFE membrane has wide chemical compatibility, excellent corrosion resistance, high rejection, high flow, and can be sterilized in various ways.
The main application of these membrane filters ist the filtration of air, gases and chemicals. PTFE membrane filters have an excellent chemical compatibility (pH 1 to 14), so that they are also used for the filtration of solvents and acids, to which other filter types are not resistant.
Hydrophilic PTFE Filter Cartridge. This filter is characterized by hydrophilic PTFE membrane to meet critical filtration requirement in extremely aggressive environment. This filter is designed for filtration of aggressive acids, bases & organic compound. It also does not require pre-wetting.
The main application of these membrane filters ist the filtration of air, gases and chemicals. PTFE membrane filters have an excellent chemical compatibility (pH 1 to 14), so that they are also used for the filtration of solvents and acids, to which other filter types are not resistant.
Table 3 shows the characteristic peaks of as-spun PTFE-Pullulan membrane and sintered PTFE membrane compared with commercial Pullulan and PTFE. All spectra show obvious absorption peak curves at 1151.8 cm −1 and 1211.6 cm −1 , which correspond to the symmetrical and asymmetric tensile vibration of CF 2 bond respectively and is a unique peak
PTFE Laminated Membrane Filters. These hydrophobic PTFE membrane filters are laminated onto polypropylene netting for improved strength and handling. Due to broad chemical compatibility and excellent water repellency, they are ideal for solvent filtration, phase separations, venting, and air sampling. Read More.
Our Fluoropore™ membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications. Fluoropore™ membranes provide broad chemical compatibility, high flow rates and consistency.
Aug 07, 2018 · Polytetrafluoroethylene (PTFE) Membrane. Hydrophobic, highly inert, and durable, PTFE is a popular material with a wide operating temperature range and resistance to the damaging effect of many chemicals. When should you use it? DO USE: for filtering solvents and other aggressive chemicals, such as acetone and DMSO.
For use with chemically agressive solutions Autoclavable Hydrophobic Biosafe Air evacuation vent Devices contain a PTFE membrane that provides highly efficient filtration in a very small area. Capsules with 1.0 µm pore size are supplied with a solvent-resistant Related Products: Sterile Ptfe Filter
solution for enabling clean, high-flow bulk chemical filtration of acids, bases, solvents, resists, or other chemicals. Engineered as a clean filter with good retention and particle removal capabil-ities, Fluorogard PE ensures filter cleanliness and enables cleaner chemical filtration. The hydrophobic PTFE membrane, combined
PTFE (polytetrafluoroethylene) membrane filters are hydrophobic in nature and is required to be pre-wetted with ethanol or methanol before the filtration of aqueous media. PTFE membrane filters have an excellent and wide chemical compatibility, therefore is used for the filtration of aggressive chemicals, and acids.