Nylon filter membrane, 47 mm diameter, 0.45 µm pore size, 100/pk 5191-4338 Nylon filter membrane, 47 mm diameter, 0.20 µm pore size, 100/pk 5191-4341 Description Part Number PTFE filter membrane, 47 mm diameter, 0.45 µm pore size, 100/pk 5191-4336
6 Aijiren Captiva Syringe Premium Filter Specifications PTFE Cellulose Acetate 4 mm 15 mm 25 mm 28 mm Pore size 0.2 0.45 0.2 0.45 0.2 0.45 0.2 0.45 Filter area (cm2) 0.07 0.07 1.7 1.7 4.8 4.8 6.2 6.2 Housing material PP PP PP PP PP PP MBS (blue) MBS
PTFE membrane filterProduct 1. Hydrophobic PTFE, Length: 10”, OD: 69mm, Rating: 0.2 micron, End Cap Type: DOE, Seal Material: Silicone, Inside: PP Inner Cor
PTFE hollow fiber membrane was fabricated via electrospinning with no organic solvent. • Pullulan was used as the carrier of the PTFE for electrospinning. • The prepared membrane shows high porous, superhydrophobicity and high LEP. • The K OE of the prepared membrane is 1.6–2.4 times higher than commercial membrane.
2020/7/23 · The hydrophobic PTFE membrane with hollow fiber structure has a very high specific surface area and provides a mass transfer interface for the two-phase mass transfer. Because PTFE material has good hydrophobicity and chemical stability, compared with other membrane materials (such as polypropylene PP or polyvinylidene fluoride PVDF, etc.), PTFE membrane has a long service life and
The hydrophobic PTFE syringe filter membrane is made of hydrophobic polytetrafluoroethylene. It filters organic solvents, aqueous solutions and gases that are chemically corrosive, and can withstand most strong acid and alkaline solutions.
Hydrophobic PTFE Membranes. PTFE membrane is manufactured in a unique way where polytetrafluorethylene (PTFE) is expanded both uniaxially and biaxially. The resultant membrane is thin, highly porous, and behaves as an absolute retentive membrane.
Minisart SRP (Hydrophobic PTFE)-17575 8. PTFE Syringe Filter Single Layered Non-Sterile/0. 45µm/ 25mm SFTF25XB SLFH025NS SYTF0602MNXX104 6874-2504 Acrodisc CR PTFE/Part No.-4219 5190-5087 Minisart SRP (Hydrophobic PTFE)-17576 9.
The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity. Added to Shopping Cart Item no.: 11803--30-----N For more
Part Number: 5190-5266. Captiva Econofilter, polypropylene housing, polytetrafluoroethylene (PTFE) membrane, 13 mm diameter, 0.45 µm pore size, 1000/pk. Add to Favorites. + Create New list. Item successfully added to your list.
PTFE Membrane ( Including TF,,NF,CF,WF Several series) TF Series has hydrophilic membrane and hydrophobic membrane.Permanent hydrophilic membrane is mainly applied in clarification, absolute steam filtration and sewage treatment. Permanent hydrophilic
Syringe Filter, PTFE, 0.45µm, 13mm Diameter. Denville. around it. Denville Syringe Filters are easy to use. They may be used with any luer-lock syringe and are color-coded for easy recognition. The 30mm syringe filters can filter up to 100mL of sample with a retention volume of less than 100µL. The 13mm filters can filter 5 to 10mL of
Aijiren ValueLab Syringe Filters Part Number: 5191-4290 ValueLab filter, hydrophobic, PTFE, 13 mm, 0.2 µm, 100/pk Add to Favorites + Create New list Item successfully added to your list /100 Pack Request Quote Please enter valid quantity Pore Size 0.2 µm
2020/7/17 · Membranes Filters: MCE, Cellulose Acetate, PES, And PTFE Filter membranes are used in various industries such as food and beverage, medical and pharmaceutical, municipal engineering water treatment, industrial high-purity water, boiler water replenishment, seawater desalination, ultrapure water in the electronics industry, wastewater treatment and reuse, material concentration, and purification.
Certified ptfe 0.2 micron filter Aijiren Syringe Filter 0.2 at Thomas Scientific Syringe Filter 0.2 found in: 4mm Syringe Filter Ca 0.2um 100 / Pk, Syringe filter PES 25mm 0.2um 1000/pk, Syringe filter PVDF 25mm 0.2um 1000/pk, Syringe.. Finneran 13mm Mini