sterlitech ptfe membrane

Foxx Life Sciences. EZFlow 25mm, 47mm, and 90mm membrane disc filters are used to retain particles or microorganisms by surface capture. The membrane disc filters are available in 0.22µm or 0.45µm pore sizes. The Hydrophobic PTFE membrane is bonded to a polypropylene support and due to its extreme chemical.

Sterilizing Grade 0.2 Micron Mini PTFE Membrane Filter Cartridge. Filters are specially designed for pre-filtration,Bio-burden and final-filtration of pharmaceutical solution.Nylon membrane with positive charged zeta particle is also available .Cartridges are designed to remove contaminants smaller than the rated pore size (including endotoxins) by way of an adsorptive mechanism.

25 mm PTFE Membrane, 0.2 um Pore Size, Nonsterile Syringe Excellent chemical resistance, suitable for most aggressive solvent, acid and base samples. Ideal for the efficient filtration of samples up to 100 mL.

PTFE (Teflon) Membrane Filter, Hydrophobic, White, Non-sterile, Plain Discs, 0,2 μm, 47 mm, 100 pcs/pack Article no.: PT02047BL 47 mm Hahnemühle non-sterile membrane filter is recommended for filtration and sterilisation of aggressive organic/inorganic solvents and samples and for venting and has a 0,2 μm pore size.

Ptfe Membrane 0.2 at Thomas Scientific. This 25 mm Millex® syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in fine particle removal from organic solvents. Syringe filter consists of a membrane sealed in a high density polyethylene housing Filter is non-sterile,

In addition, solvents or solvent mixtures which possess a relatively low surface tension will wet hydrophobic membranes spontaneously. For instance, the 0.2 µm PTFE Fluoropore® membrane requires an intrusion pressure of approximately 50 psig to affect wetting with pure water.

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity. Added to Shopping Cart

The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity. Item no.: 11842-142------G. Price (USD): $1,020.00.

PTFE. Polytetrafluoroethylene (PTFE) is a highly hydrophobic fluoropolymer. Filter membranes made using this material are ideal for filtering non-aqueous chemicals and solvents, purifying process air and gases, and protecting tank contents via tank vent filtration. Available pre-wetted for use in aqueous applications.

Feb 22, 2022 · NWF series cartridges filter media is a hydrophobic PTFE membrane, applicable to the pre-filtering and sterilization of gas and solvent. PTFE membrane has the strong hydrophobicity, its water erosion resistance capacity is 3.75 times stronger than the ordinary PVDF, so applicable to gas pre-filte. date: 2022-02-22.

Product Number 4991. E-mail Print. Quality Certificate. These filters are use in the Corning® Stripettor™ Ultra Pipet Controller. $48.73 per case. Add to cart. Out of Stock. Check Availability.

Description. Emflon PFRW cartridges are sterilizing grade hydrophobic membrane filters designed for reliable retention of bacteria and high levels of phages in compressed gas and vent applications. The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into

micropore ptfe membrane filter 0.22 um for solvent prefiltration Centrifugal Filters Our Ultrafree ® centrifugal filters with microporous hydrophilic PTFE membranes are available non-sterile with 0.22 um and 0.45 um pore sizes for 0.4 mL and 2 mL working sample volumes.

SteriLUX ® Filter (PVDF Membrane, Hydrophilic) - High Flow A versatile PVDF membrane filter designed for critical filtration of aqueous and organic solvent-based solutions.