List of ptfe membrane companies, manufacturers and suppliers near Netherlands Since 1973, Shelco has used state-of-the-art research and development to design high-quality filters that increase performance and reduce costs.

Milliseal Membrane Seal, PTFE, 18 mm. This is a 18 mm Hydrophobic PTFE Membrane Filter with a 0.45 micron pore size. For use in Sterilizing filtration, bioassays, solvent filtration. A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, ethylene oxide sterilized.

The hydrophobic PTFE fi lter membrane prevents wetting with aqueous liquids or moisture that can block free air fl ow. Some applications, however, may require fi

The naturally hydrophobic PTFE membrane is ideally suited for aggressive chemicals and gas filtration. In addition, the hydrophobic membrane provides superior flow and pressure drop characteristics per unit area for higher temperature venting applications. All

Sterile PTFE membrane gas filter SLF-T • Permanently hydrophobic PTFE membrane • Suitable for all intergrity test procedures, incl. WIT test • Pleated surface for high flow rate and long life • Stringent in - line steam sterilisations ( up to 150 cycles at 121 C )

Main Features: - PTFE membrane adopts 100% natural and permanent hydrophobic membrane material - It can ensure wet air and other gas pass through smoothly, even when the differential pressure is very low. But the water liquid can’t permeate - It holds the

Introduction to PTFE Membranes. Classic Filters first introduced PTFE membranes in 2002. They are most commonly used in sample systems to protect expensive and sensitive analytical equipment. Because they are hydrophobic water is repelled from the surface and pores of the membrane and cannot pass through.

PTFE MF Membrane PTFE Hydrophobic Membrane PTFE Film For Lamination PTFE/PP Hydrophobic PTFE/PET Hydrophobic PTFE Hydrophilic Membrane PTFE Hydrophilic Pure Membrane PTFE/PP Hydrophilic PTFE Oleophobic Membrane PTFE Membrane

Made with highly hydrophobic polytetrafluoroethylene (PTFE) membrane, these capsules are used for the filtration of non-aqueous liquids, aggressive solvents, compressed gases and

A 50 mm diameter non-sterile syringe filter with a 1 µm filter pore size hydrophobic PTFE membrane. The 1 micron filter comes in a pack of 10. A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, ethylene oxide sterilized.

Membrane: Single-layer 0.2 μm hydrophobic PTFE Membrane support and capsule shell: PP This product does not contain materials of construction that are considered specified transmissible spongiform encephalopathy (TSE) / bovine spongiform(BSE) risk

The GTM capsules are built with high hydrophobic PTFE membrane. These capsules are mainly used for filtration of non-aqueous liquids, and aggressive solvents. They are also utilized as compressed gas, and vent filters. These products are developed with filter core design, pleat setup, and with p

Wafergard® GTL In-line Gas Filters Remove particles from inert gases for flow rates up to 80 SLPM Efficient, low-cost point-of-use filtration of inert gases For flow rates up to 80 SLPM Materials: Membrane: Hydrophobic Teflon® fluoropolymer PTFE Supports/housings: Polysulfone Connections: Rc1⁄4 (PT1⁄4 female), 1⁄4” NPT female Membrane

Alibaba offers 151 Membran Filter Lab Suppliers, and Membran Filter Lab Manufacturers, Distributors, Factories, Companies. There are 94 OEM, 83 ODM, 35 Self Patent. Find high quality Membran Filter Lab Suppliers on Alibaba.

Have the ability to provide local customer service and basic technical support services. If you're interested in promoting and selling Membrane Solutions products, please don't hesitate to contact us. Toll free: 1-866-528-4572. E-mail： info@membrane-solutions.com.