Size Name: HPPTFE-25mm-0.22μm Hydrophilic PTFE Syringe Filters 25mm Diameter 0.22μm Pore Size for Laboratory Filtration Popular Brands Secure Excellent 4.7/5 34,111 reviews on Trustpilot

Hydrophobic PTFE Membrane Filters / Type 11842. The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity. Added to Shopping Cart.

MilliporeSigma Millex Samplicity Filters, Hydrophilic PTFE To be used with the Samplicity Filtration System. Powered by vacuum, the system takes minimal manual effort to filter 1 to 8 samples into standard HPLC vials in seconds, with higher recovery than syringe filters provide.

Laboratory Filter Latest news About us Quality Contact Us Medical Hydrophilic Polyethersulfone (PES) Membrane which is an ideal alternative option for PTFE membrane venting and gas filtration applications where gamma irradiation is used for product ...

This 33 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses. Millipore

PTFE membrane filters have an excellent chemical compatibility (pH 1 to 14), so that they are also used for the filtration of solvents and acids, to which other filter types are not resistant. Moreover they can be used to filter aqueous solutions as well, but because of their hydrophobic characteristics, they must be pre-wetted with ethanol or methanol before the filtration of aqueous media

Membrane, Filter Media, Roll Membrane manufacturer / supplier in China, offering Hydrophilic 5um Pes Filter Membrane for Liquid and Chemical Filtration, Nylon/Pes/PVDF/PTFE Pleated Filter Cartridges Compatible with Millipore′ S Water System, Membrane Filter

PTFE membrane filters providing the utmost assurance of chemical resistance, durability and critical filtration performance in aggressive fluids. Ultradyne ® absolute-rated polytetrafluoroethylene (PTFE) membrane filters offer the highest level of assurance of chemical compatibility and filtration performance in aggressive chemicals, prolonged hot air service and other severe process conditions.

Example:Filter needed for the apparatus fitting diameter size of 13mm Particle size (0.45um) , chemical compatibility (using Acid), and the membrane needed (hydrophilic) You will be able to find for example : PTFE Membrane filter with 0.45um pore diameter of 13mm

MS RO System (Skid) is based on the key technology of RO membrane, and combines with UF/MF, EDI/IX, Activated Carbon Filter and UV equipment to effectively remove organic matter, heat source, virus, TOC, salt ions of raw water.

This 33 mm syringe filter with a Hydrophilic PTFE membrane, for non-sterile filtration on the Samplicity G2 system, has a 0.45 µm pore size used in preparation of aqueous & organic solutions prior to chromatography or other instrument analyses. Millipore

Description Teflo Membrane TF (PTFE) Membrane Filter Media/Support PTFE with PMP (polymethyl-pentene) support ring PTFE on a polypropylene support Typical Thickness 1 μm: 76 μm (3 mils) 2 μm: 46 μm (1.8 mils) 3 μm: 30.4 μm (1.2 mils) 0.2 μm: 139 μm (5

Membrane filter, hydrophilic PTFE, 25mm Ø, pore size 0.20µm, white. For HPLC and other aqueous and organic solvent mixtures. Pack of 100

Product Description Microlab PTFE membrane media for filtration is made of PTFE(polytetrafluoroethylene), and were drawn 2-demension. It is micro-pore film. The PTFE membrane was laminated with s great variety of fabric and paper. They are new filter media.

Hydrophobic PTFE Membrane DescriptionPTFE membranes are hydrophobic in nature and are effective barriers for microbes and particulate matter. Hydrophilic PTFE membranes are also available. The high titer reduction and water intrusion pressures allow