Excellent chemical compatibility. Suitable for filtering organic solvents, acid bases. The multi layers PP membrane structure enables a graded filtration pore sizes and increases the dirt-holding capacity of the PP pleated water cartridge filters. Large flow volume, low differential pressure and long service life.

The information in this chart has been supplied to Cole-Parmer by other reputable sources and is to be used ONLY as a guide in selecting equipment for appropriate chemical compatibility. Before permanent installation, test the equipment with the chemicals and under the specific conditions of your application. Ratings of chemical behavior listed

RC also has a broad solvent compatibility. Together with PTFE, RC is a useful general-purpose option to have on-hand. Extractables are a common symptom of membrane-sample incompatibility and affect sensitive downstream analytical techniques, such as .

Polytetrafluoroethylene (PTFE) organic filter membrane, suitable for the filtration of organic solvent medium samples (including strong acids and alkalis) and organic solvents. Although it has a hydrophobic membrane, it can also be made hydrophilic by adding ethanol and deionized water.

PTFE membrane cartridge filter is constructed of imported natural hydrophobic PTFE(Polytetrafluoroethylene) membrane and non-woven support materials.Adapters are thermally welded without the uses of glues or adhesives to prevent any possibility of pollution.

77 2 Membrane Compatibility Syringe Filter Membrane Compatibility (Continued)Chemical PA PTFE PVDF CA RC PP PC PET CME CN PES Amines & Amides (Solvents with Nitrogen) Dimethyl Formamide LC C IC IC LC C ND C IC IC IC Diethylacetamide C C ND IC C ND ND ND ND ND ND

Discover the membrane filter cartridge product range of PARKER. Contact the manufacturer directly. membrane Parker Sporlan Division Parker Cylinder Division Europe Parker Hydraulic and Industrial Filtration Divisio Parker Gas Separation and Filtration Division EMEA Parker Refrigeration & Air Conditioning Parker Composite Sealing Systems Division PARKER Hydraulics Parker Hose Products

Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Color. Transparent Blue. Description. 0.2 um, 30 mm, with Pre-Filter, 100 Pk. Diameter (Metric) 30 mm. Diameter (Metric) Membrane.

Nylon, PTFE and PVDF, supporting all common sample preparation applications. The use of retainer ring seals the polypropylene housing, preventing leaking and sample loss. All KX Syringe Filters are colour coded, allowing easy identification of an individual filter, ensuring the correct filter

Syringe Filter Membrane Compatibility Chemical PA PTFE PVDF CA RC PY PC PET CME CN PES Esters Ethyl, Methyl Acetate Amyl, Propyl, Butyl Acetate Propylene Glycol Acetate 2-Ethoxyethyl Acetate Methyl Cellosolve Acetate Benzyl Benzoate

Syringe Filter Chemical Compatibility Use the information in this table to determine the ability of a specific syringe filter membrane to withstand exposure to a solvent. All concentrations are 100% unless noted. LEGEND C = Compatible LC shrink) IC

CHEMICAL COMPATIBILITY CHART PVDF Our products can be exposed to a huge variety of chemicals. The data table below is an application guide, and indicates the resistance of the specific thermoplastics we use in the construction of our products, to

Nylon membrane filters are fast becoming the "standard" filter material due to their wide chemical compatibility range and naturally hydrophilic characteristics. Nylon filters can be used to filter all aqueous and the majority of solvent solutions.

7/12/2020 · If it is the first time using the specific syringe filter membrane with your sample/solvent combination, you may have an incompatible membrane. For example, a PTFE membrane is hydrophobic, therefore, if you have an aqueous sample, it will not be compatible, and will cause excessive pressure and will burst the membrane or housing.

Example:Filter needed for the apparatus fitting diameter size of 13mm Particle size (0.45um) , chemical compatibility (using Acid), and the membrane needed (hydrophilic) You will be able to find for example : PTFE Membrane filter with 0.45um pore diameter of 13mm