PTFE membrane filters are used in a variety of applications in industries such as pharmaceutical, biosciences, laboratory testing, food and beverages, chemical engineering and air filtration. PTFE membranes have an extensive compatibility to numerous chemicals and can be

PTFE membrane filter is resistant to wide range of chemicals. Surface wetting by IPA should require prior to Liquid filtration. It is mainly used for Air/Gas filtration. Membrane is supported on non woven base to improve handling of filter. Features : Lo more

China. HS Code. 84219990. Product Description. stainless steel disc membrane 47mm filter holder. Threadless Sanitary Connections. 47mm, 90mm, 142mm, 293mm Filter Diameters. Available in Type 304ss and 316ss. Sanitary grade inlet outlet without tread connection.

wwPTFE Membrane Disc Filters are membrane with chemical compatibility for aqueous solutions and aggressive solvents. Maximum versatility. Filters aqueous solutions or aggressive chemicals. A low protein binding membrane gives a high recovery of critical

Membrane Disc Filters - Aluminum oxide (AO) membranes feature uniform, densely-packed honeycomb pore structures that contribute to The pores of microporous membrane filters act as small capillaries. When hydrophilic membranes come into contact with

Filter membranes. SABEU develops and manufactures its own microporous filter membranes ( PFOA-free) under the TRAKETCH ® brand and customizes membranes for different filtration solutions. The products are used for filtration, sealing and degassing of chemicals as well as the sterile venting in life sciences and medical technology applications

Vented In-Line Filter Holder, Stainless Steel. 47mm filter diameter Available in type 304ss or 316ss Filter liquids or gases at point-of-use This 47mm in-line holder (model KS47) is available in both type 304 or 316 stainless steel. The PTFE coated support screen prevents sticking of the membrane

17 列 · Membrane Disc Filters Sterlitech offers a comprehensive selection of polymeric and inorganic

PTFE Membrane Disc Filters - 2 µm, 47 mm (50/pkg) “Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product

• Pleated cartridge filters • Capsule and point of use filters • Laboratory disc filters Donaldson is the leading worldwide manufacturer of Tetratex® microporous expanded PTFE membranes, films and laminates. A technology-driven company committed to

PTFE membrane filters have an excellent chemical compatibility (pH 1 to 14), so that they are also used for the filtration of solvents and acids, to which other filter types are not resistant. Moreover they can be used to filter aqueous solutions as well, but because of their hydrophobic characteristics, they must be pre-wetted with ethanol or methanol before the filtration of aqueous media

PTFE Membrane Disc Filters - 2 µm, 47 mm (50/pkg) Product ID. R2PJ047. Material. PTFE with PMP (polymethyl- pentene) support ring. Air flow rate (0.7 bar (70 kPa,10 psi) 53 L/min/cm². Diameter. 47 mm.

Membrane Solutions offers full membrane filter for various solvents or liquid or gas, including PES, MCE, Nylon, PVDF, PTFE, PP, CA, Nylon Mesh and PC, the disc diameter is from 13mm to 293mm, which are manufactured in ISO 9001 certified facility. Most membranes

Wet two membrane filters (either GSWP 013 00 or HAWP 013 00) with Milli-Q water and blot them to absorbent paper to remove excess water. Glue a moist filter to each side of the diffusion chamber ring with hole (catalog number PR00 014 01) using MF cement (catalog number XX70 000 00).