网页Corning® 50 mm Diameter Syringe Filters, 0.2 µm Pore PTFE These Corning® syringe filters have polypropylene copolymer housings, hose barb inlets and hose barb outlets.

网页Titan3 PTFE (Hydrophobic) Syringe Filter 0.2 µm, 30 mm, with Pre-Filter, 100 Pk. Titan3 Polypropylene Syringe Filter Housings Meet The Requirements of 21 CFR 177.1520. Membrane: HPLC Certified PTFE, with Polypropylene Support . Titan3 PTFE (Hydrophobic) Syringe Filter 0.45 µm, 4 mm, 100 Pk.

网页Hydrophilic PTFE syringe filters in a range of pore sizes and filter diameters. Whatman Puradisc H-PTFE syringe filter contains a hydrophilic membrane that is chemically stable and inert. The H-PTFE membrane exhibits low protein binding and can be used for both aqueous and aggressive organic solvents. Can be used with both aqueous solvents and

网页Mexico ptfe membrane filter 0.2 um for gasses-Voa Vial Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported

网页a variety of membranes are available to meet your needs: polyethersulfone (pes) – low protein binding and faster flow rates; surfactant-free cellulose acetate (sfca) – lowest protein binding; polytetrafluorethylene (ptfe) – chemical resistance; regenerated cellulose (rc) – best choice for dmso compatibility; nylon (ny) – hydrophilic,

网页4423 Acrodisc CR PTFE, 0.2 µm, 13 mm 100/300 4553 Acrodisc CR PTFE Minispike, 0.45 µm, 13 mm 100/300 4422 Acrodisc CR PTFE, 0.45 µm, 13 mm 100/300 4225 Acrodisc CR PTFE, 0.2 µm, 25 mm 50/200 4219 Acrodisc CR PTFE, 0.45 µm, 25 mm 50/

网页Sartorius Minisart™ RC Syringe Filters Combines rapid small volume particle removal filtration with maximum user convenience. Sartorius Minisart™ RC Syringe Filters utilize a regenerated cellulose membrane for clarification of small volume samples. Choose from 0.2 and 0.45μm pore sizes in 15, 25 and 4mm diameter filters. Promotions are available 2

网页Jual PTFE Membrane Filter Diameter 47 mm Pori 0.45 um - Kota Jual PTFE Membrane Filter Diameter 47 mm Pori 0.45 um dengan harga Rp2.300.000 dari toko online ctr7

网页FAQs - FILTRATIONWhat membrane filter pore size should I use for sterilization? Regardless of the membrane filter material, always use a 0.2 µm pore size membrane

网页Acrodisc Syringe Filter with wwPTFE Membrane - 0.2 µm, 25 mm (200/pkg) Product ID 4927 Unit of Measure 1/EA Min Order Qty 1 Pore Size 0.2 μm µm nominal Filter Size 25 mm Alternate for 4564 Diameter (Metric) 25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media wwPTFE See All Attributes

网页Minisart® Syringe Filter, Polytetrafluorethylene (PTFE), Pore Size 0.2 µm, inert hydrophobic PTFE is suitable for venting as well as filtration of gases Chat Now Syringe Filter: 0.2

网页Corning® 50 mm Diameter Syringe Filters, 0.2 µm Pore PTFE Membrane, Sterile, Individually Packaged, 12/Case Product Number 431227 E-mail Print Quality Certificate These Corning® syringe filters have polypropylene copolymer housings, hose barb inlets

网页The filters can also be sterilized by steam-in-place procedure up to 25 cycles at 287.6°F/142°C for 30 minutes at less than 0.3 bar differential pressure. The filters can also sanitized by hot water or common chemicals that are compatible with filter components. Retention For 0.2um (0.003um in Gas)

网页PTFE Syringe and Vent Filters - Sterlitech non-sterile PTFE syringe filters stand up to the most aggressive solvent, acid and base PTFE Syringe Filters, Abluo, 0.22 Micron, 25mm, 50/pk Abluo No 0.22 25 $79.71 Add to Cart 13HP020CN PTFE Syringe No ...

网页Merck Millex™-GP Syringe Filter, PES, 0.22 μm Ideal for preparing 10–100mL samples prior to chromatography or other instrumental analyses 21 Cytiva Whatman™ Puradisc™ 13mm Sterile Syringe Filters Whatman™ Puradisc™ 13mm Sterile Syringe Filters may be used for biological and HPLC sample preparation. 22