PTFE Chemical Compatibility Chart: Polytetrafluoroethylene is very non-reactive and ideal for use with most chemicals. Review the chemical compatibility of Teflon® and PTFE with various chemicals, solvents, alcohols and other products in the cart below.

Nylon and PTFE (Teflon) membranes have broad chemical compatibility and can be used to filter most HPLC and GC fluids/solvents. PTFE can also be used to filter air or gases. Nylon is good for DMSO. PES and CA/SFCA membranes are compatible with non-alcoholic aqueous solutions and

Filter Media: GHP: GH Polypro membrane (GHP, hydrophilic polypropylene) PTFE: Hydrophobic polytetrafluoroethylene membrane on a polypropylene support Nylon: Hydrophilic nylon membrane ® membrane Solvent Syringe Filters 4 mm 13 and 25 mm Syringe Filters Syringe Filters Syringe Filters Syringe Filters

SPARTAN brand syringe filters are HPLC-certified for confidence and consistent results. Tested and certified for the absence of UV-absorbing substances (210 and 254 nm) with water, methanol, acetonitrile to ensure absence of interfering substances. • Hydrophilic, low protein-binding membrane made of regenerated cellulose

Whey concentration and demineralization. Solvay’s fluoropolymers and sulfone polymers are certified for food contact and are frequently used in applications using MF, UF, NF and RO filtration. Radel® PPSU can withstand over 1,000 cycles of repeated steam sterilization, making it an excellent choice for membranes used in dairy applications.

MS ® hydrophilic PTFE syringe filters are using special hydrophilic PTFE membrane as the filter medium. This material has a maximal chemical and pH resistance and optically clear when wet with water. Hydrophilic PTFE syringe filter is a versatile filter for aqueous and aggressive organic solvent-based solutions and especially ideal for HPLC

Membranes are identical in composition and quality to those used in Pall’s HPLC-certified Acrodisc® syringe filters HPLC certification assures that the filters will not add artifacts to your analysis GH Polypro membrane is the best choice for filtering mobile phases PTFE membrane provides the ultimate in chemical compatibility for

Syringe Filter, PTFE, 0.22µm, 13mm Diameter. Denville. the membrane, not leak around it. Denville Syringe Filters are easy to use. They may be used with any luer-lock syringe and are color-coded for easy recognition. The 30mm syringe filters can filter up to 100mL of sample with a retention volume of less than 100µL.

PTFE-H (Polytetrafluoroethylene) Johnson Test Papers’ hydrophilic PTFE syringe filters use special hydrophilic PTFE membrane as the filter medium. This material has maximum chemical and pH resistance and is visually clear when wet with water. The PTFE-H syringe filter is a versatile filter for aqueous and aggressive organic solvent based

Model : NNF. NNF series filter cartridge utilize Nylon 6,6 membrane which can be used to filter most organic solvent, such as alcohols, hydrocarbons, ethers, ketone, benzen, etc. Due to the high hydrophilicity and excellent adsorption capacity, NNF series can effectively remove micron-structured particles in all kinds of solutions.

FluorPure ®-G PTFE Cartridge Filter. Introduction. FluorPure ®-G using nature hydrophobic and high carrying amount PTFE membrane, along with reasonable configuration which make full use of the advantages of membrane, result to have long service life and long steam accumulated time.

Membrane Solutions offers full membrane filter for various solvents or liquid or gas, including PES , MCE, Nylon, PVDF , PTFE , PP , CA, Nylon Mesh and PC, the disc diameter is from 13mm to 293mm, which are manufactured in ISO 9001 certified facility. Most membranes can be sterilized if needed.

The FlipMate assemblies easily filter your sample with the use of two threaded digestion cups, a little tubing, and vacuum pressure. The sample is placed in one cup, the filter assembly threaded onto the top of the cup, then the cup and filter are flipped, the receiving cup attached, vaccum tubing attached, vaccum pressure applied, and the sample is then pulled from the sample cup, through the

Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common

manufacturer. All Aijiren Captiva Premium Syringe Filters are supplied with a HPLC or LC/MS Certificate. Choose from a variety of membrane types and pore sizes to suit your needs. Aijiren Captiva Premium Syringe Filters Premium Filters, 100/pk Description Diameter (mm) Pore Size (µm) Certification Housing Part No. PTFE 4 0.2 LC Polypropylene