PTFE Syringe Filter, 0.45μm, 13mm, Bulk Packed, Non-sterile • 229779 • Filters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives Female luer-lock inlet and male luer slip outlet Color coded by membrane type for easy identification Convenient bulk packaging PTFE (Polytetrafluoroethylene) Hydrophobic membrane has great temperature resistance

New products Ÿ Whatman™ Puradisc™ H-PTFE Syringe filters: 0.2 and 0.45 µm pore size, 13 and 25 mm diameters Ÿ Whatman™ Uniflo™ H-PTFE Syringe filters: 0.2 and 0.45 µm pore size, 13 and 25 mm diameters Ÿ Whatman™ 850-DS Channel Filter plate with expanded range of membranes Ÿ FFHP Plus Thick Nitrocellulose filters — new grades

PTFE Syringe Filter, 0.22μm, 13mm, Bulk Packed, Non-sterile • 229777 • Filters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives Female luer-lock inlet and male luer slip outlet Color coded by membrane type for easy identification Convenient bulk packaging PTFE (Polytetrafluoroethylene) Hydrophobic membrane has great temperature resistance

This Biopore membrane roll is hydrophilic, with a pore size of 0.4 microns. This is a 18 mm Hydrophobic PTFE Membrane Filter with a 0.45 micron pore size. For use in Sterilizing filtration, bioassays, solvent filtration. Non sterile Universal bottletop vacuum filter with Hydrophobic PTFE Fluoropore membrane.

Cut down your cost, improve your efficiency in the lab, and enhance your filtration strategies with our membrane disc filters. Browse through and learn more about our membrane discs below. If you didn't find what you're looking for or if you have questions, please email us at sales@foxxlifesciences.com or call 1-603-890-3699. EZBio® MCE.

The superior performance, strength and durability of TETPOR LIQUID filters stems from the use of a single layer, high security PTFE membrane, which has a high dirt holding capacity due to its high void volume. This results in low pressure drops and long service life. High flow rates are achieved due to the optimized pleat pack density and the

Syringe Filter, PP Filter, Hydrophobic PTFE manufacturer / supplier in China, offering Syringe Filter Hydrophobic PTFE Membrane Disc Diameter 13mm Pore Size 0.22, Water Analysis Filtration Inkjet Glass Fiber Capsule Filter Small Volume, Syringe Filters for HPLC/Uhplc Applications 0.22 Microns and so on.

October 24, 2017 - Sterlitech has a new option to consider for your vent filter applications: hydrophobic polyester track-etch (PETE) membrane vent filters. The PETE membrane has been modified using a proprietary process to be rendered permanently hydrophobic. These filters may be considered for vent applications where PTFE or polyolefin

Emflon PFR membrane filters meet the ever-increasing demand for air filters and offer great strength and long life, even during continuous use in hot air up to 60 °C, in vent applications up to 80 °C, and during repeated steaming in either the forward or reverse direction. Combined with high flow rates and excellent de-wetting characteristics

• Whatman Puradisc™ H-PTFE Syringe filters: 0.2 and 0.45 µm pore size, 13 and 25 mm diameters • Whatman Uniflo™ H-PTFE Syringe filters: 0.2 and 0.45 µm pore size, 13 and 25 mm diameters • Whatman 850-DS Channel Filter plate with expanded range of membranes • FFHP Plus Thick Nitrocellulose filters — new grades

Whatman™ Uniflo™ Syringe Filters are disposable filter units designed to provide clean filtrate from small volumes up to 100 mL. They are available in a variety of membrane choices with a polypropylene overmold housing, and include both sterile and non-sterile options. 13 mm, 25 mm or 30 mm diameters. 0.2 μm or 0.45 μm pore sizes.

PTFE Syringe Filter, 0.22μm, 13mm, Sterile • 229756 • Filters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives Female luer-lock inlet and male luer slip outlet Color coded by membrane type for easy identification PTFE (Polytetrafluoroethylene) Hydrophobic membrane has great temperature resistance Degassing/clarifying aqueous samples Strong

Filters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives Female luer-lock inlet and male luer slip outlet Color coded by membrane type for easy identification, and membrane material and pore size are printed on the housing Available individually packed in peel-to-open paper/plastic blister packs Also available bulk packed in PVDF, PES, PTFE, and

Silver Membrane Filter, 0.45 µm, 25 mm. Product Number. Product Description. SDS. AG4502550. This is a 25 mm Hydrophilic Pure Silver membrane filter with a 0.45 um ( 0.45 micron filter ) pore size. Used for air monitoring of carbon black, coal tar products, coke oven emissions & silica. Referenced by NIOSH for collecting airborne contaminants.

PTFE Syringe Filter, 0.45μm, 13mm, Sterile • 229758 • Filters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives Female luer-lock inlet and male luer slip outlet Color coded by membrane type for easy identification PTFE (Polytetrafluoroethylene) Hydrophobic membrane has great temperature resistance Degassing/clarifying aqueous samples Strong