Pigment-free polypropylene. Standard inlet and outlet luer connectors. Optional sterile, medical-grade blister pack. Tube-tip format (optional) for accurate dispensing into a micro-vial. Choice of membrane or glass microfiber filter media. Sterile option for critical applications. Wide range of membranes. 13 mm diameter syringe filter.

Catalog number: CH2225-NP. Use Aijiren Tech™ Choice™ PTFE Hydrophobic Syringe Filters for filtration of aggressive organic, highly basic or hot solutions and as transducer protectors. They can filter aqueous solutions after pre-wetting with an alcohol. These syringe filters provide cleaner sample extracts by removing interfering

micropore ptfe 0.2 micron filter for acids micropore 0.22um ptfe filter for acids-PTFE Membrane Filter 25mm ptfe 0.22 micron filter for acids-Voa Vial Supplier Gourmet Mushroom Supply Syringe Filter - 0.22 μm - PTFE Sizes: 13 mm & 25 mm - Available in both 13mm and 25mm diameters.

Hydrophilic PTFE 0.22/0.45 um IC Syringe Filters. Hawach hydrophilic PTFE syringe filters stand up to the most aggressive solvent, acid, and base samples. Female Luer lock inlet, male slip outlet (50mm is hose barb). PTFE syringe filter product numbers ending with "B" are hydrophobic; all other. PTFE syringe filters are hydrophilic. Chat Now

The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single open-end cartridges. They are built to withstand demanding in situ steaming conditions in either the forward or reverse direction.

Minisart ® SRP with chemically inert hydrophobic PTFE is suitable for venting as well as harsh solvents with a pH of 1 - 14. Type 17573 with a pore size of 0.2 µm can be used for sample preparation and sterile filtration. It has a male luer slip outlet. Version K is a non-sterile pack of 50. Units can be sterilized by autoclaving or EO.

Whatman PTFE membrane filters from Cytiva's business are chemically stable and inert, making them suitable for use with aggressive organic solvents, strong acids, and alkalis. The TE range features polypropylene support material for improved strength and handling Temperature resistant up to 120°C

Chemically stable and inert PTFE is the membrane of choice for use with aggressive solvents, liquids, and gases that can attack other membranes. It is resistant to most acids, alkalis, and solvents. Applications One of the major applications for the PTFE membrane is the clarification of corrosives, solvents, and aggressive fluids. This includes the important requirement in HPLC analysis for sample filtration where any solid particles can cause permanent damage to the column.

supplied with single vial compressor, PTFE membrane, pore size 0.2 μm, amber vial color, pack of 100. Expand. Hide. WHAGN203NPEORGSP. supplied with single vial compressor, PTFE membrane, pore size 0.2 μm, clear vial color, pack of 100. Expand.

Especially large, shear-stress sensitive proteins do not lose their structure and function when filtered through this special membrane. This will improve your process output even further. Compare this item Syringe filter PTFE 25mm 0.2um 1000/pk Aijiren Technologies Aijiren Technologies products are intended for sale/shipment within the US only.

Feb 3, 2023 · It is mainly used for flue gas filtration of various industrial furnaces such as chemical industry, iron and steel, metallurgy, carbon black, power generation, cement, waste incineration, etc. PTFE filter membrane, the pore size of the membrane can be controlled between 0.2 and 15 μm, and the porosity can reach more than 85%. 3.

Description: Sterile 20X Saline-Sodium Citrate (SSC) prepared with 18.2 megOhm water, 0.2 micron sterile filtered and steam sterilized in final packaging Sodium acetate 3 M Supplier: Grow Cells Description: Ready-to-use sterile solution prepared with 18.2 megOhm water, 0.2 micron sterile filtered, pH adjusted to 5.5 with Glacial Acetic acid.

Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high Related Products: Hydrophobic Filter Compare this item

Keyword:'0.02 um syringe filter' Showing 1-30 of 87 results for " 0.02 um syringe filter " within Products. Sort by Relevance. All Photos (1) Millex-HV Syringe Filter Unit, 0.45 µm.

PTFE filter membrane is resistant to most solvents. Available in 0.1, 0.2, 0.45, and 1.0 µm pore sizes. 1.0 µm pore size capsules used for extended life and filtration of highly contaminated solutions. Manufactured according to ISO9001:2008 QMS standards. Autoclavable capsule filtration device if sterility is required.