PTFE filter can be used to filter sample volumes to a high level of purity. PVDF filter is ideal for filtering aqueous and organic solutions where low-protein affinity is needed. Our syringe filters can be used in various laboratory applications, including research and pharmaceutical laboratories.
CHROMAFIL disposable syringe filters are used for filtration of suspended matter from liquid samples (1–100 mL). The filter can be used for sample preparation for HPLC, GC, ICP, AAS, TOC, DOC, IR, NMR, photometry, and spectroscopy samples to filter out contaminants and extraneous particles that can affect analytical results or clog liquid pathways, frits, etc.
Sterile Syringe Filters. Sterile Diamond® PureFlow™ syringe filters satisfy requirements of life science applications for sterilization of solutions or clarification of biological fluids. Sterile filters include a polypropylene microfiber pre-filter layer to improve filtration of particulate-laden fluids that are difficult to filter with
Syringe Filters by Pore Size 0.45 μm and 0.2/0.22 μm are the two most frequently used membrane pore sizes for research and medical applications. 0.45 μm membranes are typically used for general filtration and particle removal applications.
• Nylon filters provide broad chemical compatibility for use with aqueous and organic solutions. • ®Millipore Express PLUS (PES) filters have fastest flow rates and higher throughput. • MF-Millipore™ mixed cellulose ester (MCE) membrane is a widely used, general purpose filter. Millex Syringe Filters Filter with confidence
*NOTE: Due to high demand, 13 and 25 mm diameter syringe filters are experiencing increased lead times. Polypropylene Syringe Filter Product Benefits: Hydrophobic (can be wetted with alcohol for use with aqueous solutions) Broad chemical compatibility; Extremely low extractable level; Low hold-up volume
Make sure that the Luer-Lok™ is matching with the syringe to prevent the filter from coming off during the filtration. Filtration. Direct the SiliCycle Syringe Filter tip into the collection vessel and apply gentle pressure onto the syringe plunger. Push the liquid sample and the air volume through the SiliCycle Syringe Filter to maximize
How To Use a Syringe Filter. Fill the syringe with the solution to be filtered. Fasten the filled syringe to the FLL inlet of the syringe filter with a twisting motion. With the outlet pointed upward, gradually apply pressure to the syringe plunger to initiate flow. Continue thumb pressure until all the air in the device is displaced with
Intro. There are so many solvents and syringe filter/membrane materials that it can be tough to remember which combinations are safe and which are corrosive. These tables show five common syringe filter materials -- Cellulose Acetate (CA), Nylon, PES, PTFE, and PVDF -- and their compatibilities with 75 common solvents.
Minisart ® NML Syringe Filters provide the optimal method for clarification and sterilization of liquids, robustly removing bacteria and particles, without any impact on product quality or loss of target molecule. Superior filter areas up to 6.2 cm 2. 0.1µm to 5µm pore sizes. Low adsorption characteristics.
Superior filter areas of up to 6.2 cm 2; Pore sizes ranging from 0.1 μm to 5 μm; Low adsorption properties; CE-Minisart ® syringe filters For medical use. Image Credit: Sartorius Lab
Filters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives Female luer-lock inlet and male luer slip outlet Color coded by membrane type for easy identification, and membrane material and pore size are printed on the housing Available individually packed in peel-to-open paper/plastic blister packs Also available bulk packed in PVDF, PES, PTFE, and
You can purchase syringe filters with cellulose or PEEK membranes, but they aren't as chemically inert. 0.22um is the standard because its used in sterile applications. For samples with lots of particulate which clog things up, you can simply run them through a rough filter, and then the fine one.
Syringe Filters, Membrane Filters, Nylon, PTFE, PES, PVDF Syringe Filters , Gridded MCE Membrane Filter, Sample Vials and other high-level laboratory consumables products, All Syringe Filters, Membrane Filter , Gridded MCE Membrane Filter, Sample vials are produced according to ISO9001 standard system.
Use these all-plastic disposable syringes with your Titan3, Target2, and Choice Basic syringe filters. Comprising a polypropylene barrel and polyethylene plunger, these syringes eliminate problems with rubber or synthetic plunger gaskets and requires no silicone or oil lubricant in the barrel. Choose from in 1, 3, 5, 10, 20, 30, and 50 mL sizes.