Shipping: Calculated at Checkout. $145.00 +GST. Quantity: Stock Check. Description. Product Specifications. MS® Syringe Filters are simply quality filters, well packaged, and offered at a fair and competitive price. The Classic range is available in PES which is supplied in 13mm and 30mm formats in virgin polypropylene housings.
Syringe Filter 0.2 Micron. 1. Product Introduction 1) Description Sterile Nylon syringe filters provide a universal application for common analytical applications. All filters produced in cleaning room to avoid any contamination. 2) Details 3) Advantages * Female Luer Lok inlet,
Designed for ultracleaning of small volume samples for the HPLC or GC analysis. Sartorius Minisart™ SRP Syringe Filters are single-use filtration units with a chemically resistant PTFE membrane and male luer slip outlet. Available in 4, 15 and 25mm diameter filters with 0.2 or 0.45 μm pores. Pricing and Availability.
Cellulose Acetate syringe filters. MicroScience Cellulose Acetate syringe filters come in both sterile and non-sterile format in 33mm diameter size. Applications include: Sterilise biological fluids, serum or media additives Sample preparation of aqueous solutions Sample preparation of protein-based HPLC solutions High throughput, low binding.
Hold the syringe with the filter pointing up and “top off” by pushing a few drops through the filter. Place the filter tip over the collection container and push the sample through a syringe filter by applying gentle positive pressure. To purge the syringe filter and maximize sample throughput, remove the filter from the syringe and draw air into the syringe. Then reattach the filter and push the plunger to force some of the air through the filter.
Sterile filtration, clarification, and particle removal. Minisart ® NML Syringe Filters provide the optimal method for clarification and sterilization of liquids, robustly removing bacteria and particles, without any impact on product quality or loss of target molecule. Superior filter areas up to 6.2 cm 2. 0.1µm to 5µm pore sizes.
GVS 1229466 Syringe Filter, Glass Fiber,Cellulose Acetate, 0.22 µm, 30 mm (Pack of 1000) GVS This GVS Life Sciences part number,1229466, is made of Glass Fiber,Cellulose Acetate.
A syringe filter is a single-use filter cartridge. It is attached to the end of a syringe for use. Syringe filters may have Luer lock fittings, though not universally so. The use of a needle is optional; where desired it may be fitted to the end of the syringe filter. The fluid to be purified may be cleaned by drawing it up into the syringe
18/7/2019 · The size of the syringe filter is up to the diameter of the membrane filter inside of it. There are 4 kind of main size in the market which are 4mm, 13mm, 25mm, 33mm. The diameter of the membrane also directly affects the amount of reagents that the filter can filter. Please refer to the information below to compare the amount of filtration solvent corresponding to the four membrane diameters.
Syringe filters with different pore size ratings are suitable for different applications. For example, syringe filters containing 0.45 μm are typically used for HPLC sample preparation and 0.2 μm is used for UHPLC. In life science applications 0.1 and 0.2 µm pore sizes provide sterilization of buffers, culture media, and additives. Larger 0.
Use these all-plastic disposable syringes with your Titan3, Target2, and Choice Basic syringe filters. Comprising a polypropylene barrel and polyethylene plunger, these syringes eliminate problems with rubber or synthetic plunger gaskets and requires no silicone or oil lubricant in the barrel. Choose from in 1, 3, 5, 10, 20, 30, and 50 mL sizes.
18/6/2022 · These syringe filters are ideal for applications in pharmaceutical, environmental, biotechnology, food, beverage and agricultural testing laboratories. Female Luer-Lock inlet and Male-Luer slip outlet. Both Non-sterile and Individual packed Sterile syringe filters are available. Pore size of filter media are available from 0.1um-10um.
CHROMAFIL® MULTI 96 filter plates. Disposable syringes, PP, with luer tip. HPLC syringe filter ProFill, PTFE. HPLC syringe filter ProFill, RC / PA. LLG Syringe Filter CA, Cellulose acetate. LLG Syringe Filter GF, Glass-fibre. LLG Syringe Filter NY, Nylon/Polyamide. LLG Syringe Filter PE, Polyethylene. LLG Syringe Filter PES, Polyethersulfone.
Hydrophilic CA (Cellulose Acetate) is well suited for use with aqueous based solutions and is the best choice when maximum protein recovery in the filtrate is critical. *Low protein binding, suitable for aqueous protein solution *Standard 1Micrometre pre-filter providing increased sample handling capacity *High flow ra
0.22 micron 0.45 micron syringe filters nylon Nylon PTFE PES GF glass fiber 13mm 30mm 25mm PVDF Polyvinylidene Fluoride Cellulose Acetate Filter syringe filter. $ 0.00 . 843-352-3518 sales@syringefilter.com. Home; Catalog; About Us; Filter Selection Guide