Syringeless and Syringe Filters. Syringe filters and membranes for the removal of interfering materials and fine particles prior to injection; includes filters both with and without syringes; suitable for both aqueous and aqueous-organic samples; often constructed from PVDF or PTFE. Read More. Read Less. Pore Size.
A variety of membranes are available to meet your needs: Polyethersulfone (PES) – low protein binding and faster flow rates; surfactant-free cellulose acetate (SFCA) – lowest protein binding; polytetrafluorethylene (PTFE) – chemical resistance; regenerated cellulose (RC) – best choice for DMSO compatibility; Nylon (NY) – hydrophilic, surfactant-free, and lowest extractable. 100%
Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the cartridges remove fragments that would otherwise
Cytiva Whatman™ GD/X PTFE Syringe Filters. Processes three to seven times more sample volume than filters without prefilter. Whatman™ GD/X PTFE Syringe Filters are specifically designed for filtration of viscous or otherwise hard-to-filter samples with high solids content. £558.00 – £2430.00.
Step 2: Attach a syringe filter to the Syringe. Open the syringe filter package so that you can later pick the filter up easily, especially for individually packed sterile syringe filters. a. For sample volume < 10 mL. Draw a small amount of air (about 1 mL) into the syringe before loading the sample solution.
25 mm PSF Acrodisc Syringe Filters. Features a large effective filtration area for increased sample throughput, ideal for sample volumes of ≤ 125 mL. Pall’s proprietary membrane technology and accurate pore size ratings offer superior HPLC column protection, helping extend column life by as much as 52 times. Shop Now 25 mm PSF Syringe Filters.
Feature: filter diameter: 13mm, pore size: 0.22um, membrane material: nylon , hydrophilic property , no need to moist beforehand, uniform aperture , strong tenacity and adsorb ability, syringe filters for cell culture provide effective filtration for a wide variety of sample types designed with a female luer-lok inlet and male luer-slip outlets
MS ® Nylon Syringe filters are strong membranes with high thermostability, compatible with aqueous and organic solutions (except acids and bases), including most HPLC solvents, hydrophilic surface; does not require pre-wetting.
Zymo Research Corporation. The ZymoPURE™ Syringe Filter features durable polypropylene construction and novel filtration media that allows for rapid clarification of up to 60 ml of neutralized bacterial lysate using the supplied polypropylene plunger. Each ZymoPURE™ Syringe Filter also includes a pre-attached ABS.
Sterile filtration, clarification, and particle removal. Minisart ® NML Syringe Filters provide the optimal method for clarification and sterilization of liquids, robustly removing bacteria and particles, without any impact on product quality or loss of target molecule. Superior filter areas up to 6.2 cm 2. 0.1µm to 5µm pore sizes.
Pall manufactures syringe filters that are used to sterilize liquid reagents, remove particulate contamination, and clarify solutions prior to further processing. These products are optimized for biological, pharmaceutical, and sterilizing filtration requirements. Pall’s sterile syringe filters are available with a variety of high-performance
0.22 micron 0.45 micron syringe filters nylon Nylon PTFE PES GF glass fiber 13mm 30mm 25mm PVDF Polyvinylidene Fluoride Cellulose Acetate Filter syringe filter
The labForce Solvent Filtration vacuum filters are a safe alternative to syringe filtration as well, using vacuum to filter a liter or more without the need for manual syringe work. The simple funnel design eliminates the risk of Related Products: Hplc Solvent Filter Compare this item Nonsterile MCE Syringe Filters Thomas®
Sep 28, 2016 · The majority of syringe filters used do not allow you to reclaim the solid. They are often used before analysis to remove any solid, undissolved, material. Other, filter holder (in-line) types allow you to regain your filter (Figure 1). Syringe filters normally use membrane type filters which have a specific particle size cut off (e.g. 0.45 μm).
0.22 µm Syringe Filter, Cellulose Acetate (Sterile), Blue, ⌀ 33 mm STARLAB reserves the right to make changes at any time and without prior notice. The content ...