We carry syringe filters made of nylon, glass fiber, polypropylene (PP), polyethersulfone (PES), PVDF, polytetrafluoroethylene (PTFE), cellulose acetate, and more. HPLC Syringe Filters available in two sizes: 13 mm and 30 mm. Two pore sizes: 0.2 µm and 0.45 µm. Glass Fiber syringe filters available in 1.2 and 0.7 µm.
Pack of 25 - $61.89 USD Single Filter - $3.29 USD Pack of 100 - $239.99 USD. $61.89. Buy it now. More payment options. Maximum quantity available reached. Key Features: Ozone resistant materials, kynar and ABS. Luer lock connections for easy connection to syringe and other accessories. 0.22u filter, for filtering out small particulates.
100 Pack Syringe Filter PTFE Hydrophobic 0.22um Membrane 13mm Pore Size Filtration Non-Sterile Syringe Lab Filters. $2999 ($3.00/10 Items) Save $6.00 with coupon. Get it as soon as Thu, May 19. FREE Shipping by Amazon. Only 2 left in stock - order soon.
Filters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives Female luer-lock inlet and male luer slip outlet Color coded by membrane type for easy identification, and membrane material and pore size are printed on the housing Available individually packed in peel-to-open paper/plastic blister packs Also available bulk packed in PVDF, PES, PTFE, and
3 offers from $13.99. #2. Biomed Scientific Syringe Filters PTFE 13mm Diameter 0.22um Pore Size Non Sterile Pack of 10. 4.6 out of 5 stars. 214. 7 offers from $8.99. #3. Sterile Syringe Filters PES 25 mm Diameter 0.22 um Pore Size Individually Packaged 10/pk by Biomed Scientific. 4.5 out of 5 stars.
Syringe Filter Selection Guide. Use our quick, interactive syringe filter selection guide to find out what filter is best suited to your analysis. In a few clicks you can submit your recommendations and we will send you a free, personalised sample pack. While you are here you should also look at our filtration products page.
Syringe Filter (SFCA) SFCA – Good for cell culture. Unlike CA, SFCA. Does not contain any of the pre-wetting agents found in CA. Is lower protein binding and contains lower extractables than standard CA. **All Syringe Filters are supplied sterile (gamma irradiated) and are individually wrapped. Bulk 100pcs/case pack option available, part
Syringe filters are sterilized by gamma irradiation, preventing the contamination risk that can result from ethylene oxide sterilization. They are individually blister packed to ensure sterility during storage and handling. Replacing a syringe filter midway through the process may lead to contamination, spills, and workflow disruption.
These syringe filters are recommended for "pharmaceutical" grade HPLC Sample Prep & Dissolution Testing when GLP and GMP are required. Manufactured with proprietary and various membrane types in 25mm, 13mm or 4mm polypropylene housings. These color coded, syringe filters are also made for laboratories that require consistent, high performance
Dec 25, 2019 · Syringe filters are available with the following membranes: Nylon, MCE, Polyethersulfone, Polypropylene, PTFE, PVDF and Regenerated Cellulose. Porosities range from 0.1 µm – 10 µm, available filter diameters range from 4 mm (up to 2 ml sample volume) up to 30 mm (up to approx. 200 ml sample volume). Adapted with luer-lock in order to
The PSF syringe filter has a much larger effective filtration area compared with the older traditional model, 3.9 cm 2 compared to 2.8 cm 2. Therefore, this gives the PSF syringe filter a much improved throughput and flow rate.
Typical applications are clarification, sterile filtration, sample preparation and sterile venting.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the
Water and acetonitrile were passed through polypropylene or PTFE syringe filters (as indicated in legend), then used 1:1 (v/v) to prepare the mobile phase for UHPLC. The system was run at 0.25 mL/min for 600 min with backpressure recorded every 50 min. DP represents total change in backpressure after 600 min.
Syringeless and Syringe Filters. Syringe filters and membranes for the removal of interfering materials and fine particles prior to injection; includes filters both with and without syringes; suitable for both aqueous and aqueous-organic samples; often constructed from PVDF or PTFE.
Hold the syringe with the filter pointing up and “top off” by pushing a few drops through the filter. Place the filter tip over the collection container and push the sample through a syringe filter by applying gentle positive pressure. To purge the syringe filter and maximize sample throughput, remove the filter from the syringe and draw air into the syringe. Then reattach the filter and push the plunger to force some of the air through the filter.