MILLEX® Sterile Syringe Filters Hydrophilic PTFE Membranes MilliporeSigma A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50 Related Products: Hydrophilic Ptfe Compare this item Hydrophobic PTFE Membrane Filters
Aijiren Tech Nalgene. Side-arm has a quick-disconnect tubing adapter and blue collar. Model 1234K62 filter cap has a 500 mL capacity and fits a 33 mm neck size bottle. Model 1234K63 filter cap has a 500 mL capacity and fits a 45 mm neck size bottle. Both filters have 75 mm diameter membranes with a 0.2 µm pore size.
Description. PTFE Membrane Disc Filters - TF 200, 0.2 µm, 25 mm (100/pkg) “Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please email us a question or call 1-800-521-1520."
The hydrophobic PTFE membrane filters are made of polytetra-fluorethylene (PTFE) only and are therefore permanently hydrophobic. Unlike hydrophilic filter types, they are not wetted by air humidity. Request a Quote* * 72 Hours Turnaround Time See more Products below Choose your product Products (33) Filter your product
Reinforcing ring provides greater strength to the housing to prevent leakage and bursting (30mm products pressure rated to 120 psi) Housings are manufactured from solvent-resistant, low-extractable polypropylene resins specifically selected for wide compatibility with common HPLC sample matrices Able to filter solutions at temperatures up to 100°C
0.2 um pore size, Hydrophilic PTFE membrane, 47 mm diameter Omnipore Membrane Filter MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. Technical Information Data Sheet JGWP04700 100 pack, 0.2 µm, 47 mm, white, plain Price could not be retrieved Recommended Products Overview
Catalog number: CH2225-NP. Use Aijiren Tech™ Choice™ PTFE Hydrophobic Syringe Filters for filtration of aggressive organic, highly basic or hot solutions and as transducer protectors. They can filter aqueous solutions after pre-wetting with an alcohol. These syringe filters provide cleaner sample extracts by removing interfering
Millex ® hydrophilic PTFE syringe filters boast low analyte retention, with ≥90% recovery of small molecules – matching or exceeding the performance of other equivalent filters. Figure 2. Comparison of small molecule retention of 0.45 μm hydrophilic PTFE syringe filters from different vendors. Figure 3.
Whatman PTFE membranes from Cytiva are strong hydrophobic membrane filters resistant to the corrosive solvents and aggressive media used in gas sterilization* and liquid clarification. Polypropylene grid support material for increased strength Temperature resistant up to 120°C Resistant to most aggressive acids, alkalis, and solvents
Our LifeASSURE™ PFS series PTFE Filter Cartridges use a hydrophobic polytetrafluoroethylene (PTFE) membrane, which helps minimize pore blockage from moisture in vent applications. Our filters are validated by a liquid bacterial challenge for complete retention based on the ASTM standard, which provides a high level of reliable sterilizing performance.
These hydrophobic PTFE membrane filters are laminated onto polypropylene netting for improved strength and handling. Due to broad chemical compatibility and excellent water repellency, they are ideal for solvent filtration, phase separations, venting, and air sampling. Laminated ePTFE features improved handleability, enabling convenient use in
PTFE is a hydrophobic membrane, so it will repel water and is not suitable for the filtration of aqueous solutions. As well as being suitable for the filtration of organic solvents in applications such as HPLC and UHPLC sample preparation, the hydrophobic nature of the PTFE membrane makes these syringe filters ideal to use in gas filtration or as a moisture barrier in venting applications. 25 mm Standard Acrodisc Syringe Filters
BRAND® macro pipette controller membrane filters 3 μm (PP,PTFE) Match Criteria: Product Name, Keyword All Photos ( 2) Aervent®-50 Filter Unit 0.2 µm hydrophobic 1/4 in. HB/HB Synonym (s): Aervent® Capsule Filter Match Criteria: Product Name All Photos ( 1) Millex-FA Syringe Filter Unit, 1.0 µm, hydrophobic PTFE, 50 mm, HB-HB
The PSF syringe filter has larger effective filtration area compared with the older traditional model, 3.9 cm 2 compared to 2.8 cm 2. This gives the PSF syringe filter a much improved throughput and flow rate. PTFE PSF syringe filters are available with a multi-layered glass fiber prefilter (GxF) above the PTFE membrane.
MilliporeSigma. This 25 mm Millex® syringe filter with a Hydrophobic PTFE membrane, for non-sterile filtration, has a 0.2 µm pore size used in fine particle removal from organic solvents. Syringe filter consists of a membrane sealed in a high density polyethylene housing Filter is non-sterile,. Compare this item.