High-Capacity Plastic Filter Housingswith Cartridge for Drinking Water. Also known as reverse osmosis water filters, these include several cartridges to reduce odor, rust, sediment, and lead from drinking water, as well as a tank to store filtered water.
Sterile 70% Isopropanol contains 70% by volume USP-grade Isopropanol (isopropyl alcohol) and 30% USP-purified water. Features Made with USP-grade Isopropanol Filtered through 0.22 micron filter Gamma-irradiated to a sterility level of 10-6 Double-bagged in solvent-safe bags and packaged. Related Products: 70 Alcohol.
Oct 29, 2021 · Home » News » HPLC Syringe Filter » EXW price 0.2 micron hplc filters Advantec Advantec Unlaminated PTFE Hydrophilic Membranes - PTFE Membranes Advantec's line of unsupported, hydrophilic, pure PTFE membranes are ideally suited for use in HPLC separations and other applications involving mixtures of aqueous and organic solvents.
The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single open-end cartridges. They are built to withstand demanding in situ steaming conditions in either the forward or reverse direction.
Filson 0.22 micron PTFE filter can be fabricated into different sizes with diameter ranging from 25mm to 142mm. Comparing with other PTFE filters, it has higher porosity of 85% and its filtration area can reach 19.6 cm 2. Having outstanding chemical compatibility, Filson 0.22 micron PTFE filter is your best choice on filtering strong corrosion, acid, alkali and organic solvents.
PTFE membrane filters are hydrophilic and autoclavable. They come in 0.22 µm and 0.45 µm pore sizes. Nylon is resistant to a range of organic solvents and suitable for use with high pH samples. Nylon may bind proteins, which makes it unsuitable for protein recovery applications.
PTFE Hydrophobic Syringe Filters. Features: Highly hydrophobic. Excellent chemical compatibility. Very low extractables. Superior flow performance compared to other hydrophobic membranes. Applications: Clarification of nonaqueous lab reagents, solvents and samples. Filtration of nonaqueous chromatography samples and mobile phases.
PTFE Hydrophobic Syringe Filters. Features: Highly hydrophobic. Excellent chemical compatibility. Very low extractables. Superior flow performance compared to other hydrophobic membranes. Applications: Clarification of nonaqueous lab reagents, solvents and samples. Filtration of nonaqueous chromatography samples and mobile phases.
EZFlow® PTFE Membrane Disc Filters Foxx Life Sciences EZFlow 25mm, 47mm, and 90mm membrane disc filters are used to retain particles or microorganisms by surface capture. The membrane disc filters are available in 0.22µm or 0.45µm pore sizes. The Hydrophobic PTFE membrane is bonded to a polypropylene support and due to its extreme chemical
As a membrane filter manufacturer, Hawach provides a series of pore sizes (0.1μm, 0.22μm, 0.45μm, 1.0μm, 3.0μm, 5.0μm, 10μm), high porosity, large dirt holding capacity, recoil and high-temperature disinfection; good pressure resistance. Thin, and highly porous, our PTFE disc membrane has OEM service and their sizes could be customized.
PTFE Syringe Filters, 0.22 um, 25mm, Double Luer Lock, PP Housing, Nonsterile, 100 per pack, SPEC16251 Regular Price $152.01 Price $132.18 As low as $118.96 Add to Cart Tisch Scientific Cellulose Acetate (CA) Syringe Filter, 0.22 µm, 25 mm, Luer-Lok/Luer Slip, Nonsterile, 100 Pack, SF14487 Regular Price $107.98 Price $93.89 As low as $84.50
50mm 0.22um Hydrophobic PTFE air Vent Filter for Vacuum Pump 50MM PTFE INLET SYRINGE FILTER: 50mm 0.22um or 0.45um PTFE Inlet Syringe Filters, Hydrophobic PTFE membrane is laminated with polypropylene. 50MM PTFE MAIN APPLICATION: Naturally hydrophobic PTFE membrane provides the best chemical resistance, and can be used forventing applications or filtering gases , individually wrapped filters.
Stericup Quick Release-GP Sterile Vacuum Filtration System. Compare. Product No. Description. Pricing. S2GPU05RE. Stericup Quick Release-GP sterile vacuum filtration system combines a 500 mL Steritop bottle top filter unit, which uses a 0.22 µm pore size fast flow PES Express PLUS membrane, with a 500 mL receiver flask for sterilizing tissue culture media, protein & DNA.
AAWP04700. MF-Millipore ® Membrane Filter, 0.8 µm pore size, 47 mm diameter, mixed cellulose esters (MCE) membrane, hydrophilic, white, 100 discs. 0.8 μm pore size. 82 % porosity. Expand. VSWP01300. MF-Millipore ® Membrane Filter, 0.025 µm pore size, 13 mm diameter, mixed cellulose esters (MCE) membrane, hydrophilic, white, 100 discs.
Nalgene™ 50mm inline filter with PTFE membrane provides an excellent barrier for sterile venting of benchtop fermentors, in-line gas filtration, or protecting vacuum pumps from moisture. It also gives the ability to filter aggressive chemicals, including acids and non-aqueous solvents, such as those used in GC and HPLC. Autoclavable