Filter pore size is chosen based on the application. If the application requires a sterile fluid, than a 0.22 micron membrane would be used for standard solutions that have bacterial bioburden. A 0.1 micron filter would be used for applications where mycoplasma is a concern.
Description. Durapore® Membrane Filter, 0.22 µm. Background Information. Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic Durapore® membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes. Features & Benefits.
Description Millipore Express ® SHF (Sterile High-Flux) filters are an unparalleled combination of quality and process performance. A sterilizing-grade, hydrophilic polyethersulfone (PES) membrane, these filters provide sterility assurance, broad chemical compatibility, and exceptionally high flow rates for your validated process steps.
SLFG05010. Millipore. Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm. A 50 mm diameter non-sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane. Comes in a pack of 10. Millex-FG, 0.20 µm, hydrophobic PTFE, 50 mm MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
Emflon PFAW cartridges are high capacity hydrophobic membrane filters designed for reliable reduction of particles and microorganisms in compressed gas and vent applications. The filter element features Pall’s proprietary 0.2 micron polytetrafluoroethylene (PTFE) membrane, pleated to give high area in single open-end cartridges.
The 0.2 µm hydrophobic Aervent® polytetrafluoroethylene (PTFE) membrane provides sterility assurance, high flow rates and throughput. The Aervent® membrane contributes to clean processes due its non-fiber releasing properties. Hydrophobic Aervent® cartridge filters provide high throughput with minimal differential pressure.
Flow Rate (Nm3/h) Pressure Drop (bar) 0510 25 30 04812 16 scfm psid 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0.25 0.20 0.15 0.10 0.05 0.0 15 20 0 PSIG Outlet 15 PSIG Inlet 30 PSIG Inlet Opticap XL 2 Capsule With 0.2 m Aervent Membrane — FF Fitting Flow Rate (Nm3/h) Pressure Drop (bar) Air Flow Rate at 25°C - Litre/min for MTGR 050 00 Unit
Millipore ptfe 0.2 micron filter for gasses Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm | SLFG025LS SLFG025LS MilliporeMillex-FG, 0.20 µm, hydrophobic PTFE, 25 mm · A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane,
0.22 µm Durapore ® PVDF membranes for sterilization of aqueous solutions with very low protein binding 0.45 µm Durapore ® PVDF membranes for clarification of aqueous solutions View Sterivex™ products S tericap ™ bottle-top filters The Stericap™ Universal Bottle-Top Filter Device enables fast vacuum filtration into compatible bottles.
Product Series: HIGH FLOW TETPOR H.T. Product Style: Cartridge; Filter Construction: Pleated; Filter Material: Expanded PTFE; For Fluid Type: Air and Gas; Pressure Differential: The maximum differential pressure in direction of flow (outside to in) is 3.0 barg (43.51 psig) at 90°C (194°F)
0.1 µm Hydrophilic Durapore Membrane Opticap XL 2 Capsule with Durapore Membrane Millipak Capsule Legend0.1 Refersm Nominal (KVVL) to Connection Type = 14 mm (9/16 in.) Hose Barb Inlet and Outlet = 6 mm ( in.) NPTM Inlet and Outlet = 19 mm ( in.) Sanitary Flange Inlet and Outlet = 38 mm (1 in.) Sanitary Flange Inlet and Outlet
Our Fluoropore® membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications. Fluoropore membranes provide broad chemical compatibility, high flow rates and consistency. (Please note that catalogue numbers containing "FHUP" are unlaminated, or produced without a backing.)
SLLG025SS. Millipore. Millex-LG, 0.20 µm. Download. Zoom. A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Comes in a pack of 50. Millex-LG, 0.20 µm MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. FAQs.
The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single open-end cartridges. They are built to withstand demanding in situ steaming conditions in either the forward or reverse direction.
Millipore Express ® PLUS PES membranes offer fast flow, high filter capacity and low protein binding, while remaining bacterially retentive. The unique asymmetric structure of Millipore Express ® PLUS membranes extends filtration capacity and lifetime, allowing them to tolerate higher particle loads and protein concentrations.