0.2μm PTFE Filter for safe vapor filtration. The Air Inlet Valve and PTFE Filter blocks out all harmful solvent vapors while also absorbing incoming contaminants from the incoming air. This valve threads directly into any of Foxx Life Sciences HPLC Reservoir Manifolds. The sealed Related Products: Hplc Solvent Filter Compare this item
filter capacity 150 mL, pore size 0.2 μm, fits 45 mm bottle neck. Expand. Hide. Z370541. filter capacity 150 mL, pore size 0.2 μm, fits 33 mm bottle neck. Expand. Hide. Z358215. filter capacity 500 mL, pore size 0.2 μm, fits 33 mm bottle neck.
Lab Filters: Amazon.com. Whatman 10463503 PTFE ReZist Syringe Filter for HPLC, 30mm, 0.2 Micron (Pack of 100) No reviews Whatman 7592-104 PTFE PM 2.5 Air Monitoring Membrane Filters, 46.2mm Diameter (Pack of 50) Whatman 0.2 um syringe filter for solvent prefiltration-HPLC . Hot selling 0.2 um syringe filter for solvent prefiltration.
Whether your research necessitates prefiltration, sample preparation, sterile filtration, laboratory filtration, or gas venting, Nalgene syringe filters are lab essentials. Key Features 10 to 100mL sample size Inlet: Female Luer-Lok™ Outlet: Male Luer slip Polypropylene housing with ID color rings Pore size and membrane type printed on unit
hydrophobic ptfe 0.2 micron filter for solvent prefiltration Oct 29, 2021 · China ptfe membrane filter 0.2 um for solvent prefiltration biological fluids and gases is usually done with 0.2 or 0.22
Feb 22, 2022 · NWF series cartridges filter media is a hydrophobic PTFE membrane, applicable to the pre-filtering and sterilization of gas and solvent. PTFE membrane has the strong hydrophobicity, its water erosion resistance capacity is 3.75 times stronger than the ordinary PVDF, so applicable to gas pre-filte. date: 2022-02-22. Send Inquiry.
0.2 µm µm nominal Filter Size 25 mm Diameter (Metric) 25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media Hydrophobic PTFE Hold-Up Volume <125 µL Housing Material polypropylene Maximum Operating Pressure (bar) 2.1 bar Maximum Operating Temperature (Metric) 100 °C Quantity 50 pkg Typical Flow Rate 245 mL/min at 1.0 bar (100 kPa, 15 psi)
0.2 µm Filter Diameter ⌀ 47 mm $493.00 Hydrophobic PTFE Membrane Filters / Type 11806 25 Item no. 11806-100------G Pore Size 0.45 µm Filter Diameter ⌀ 100 mm $493.00 Hydrophobic PTFE Membrane Filters / Type 11803 100 Item no. 11803--13------N Pore Size 1.2 µm Filter Diameter ⌀ 13 mm $329.00 Hydrophobic PTFE Membrane Filters / Type 11806 100
Oct 29, 2021 · Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high flow rates and throughput, low extractables and particle
Polytetrafluoroethylene (PTFE) membranes have high strength and broad chemical compatibility, and are commonly used to clarify aqueous solutions, organic solvents, corrosives, and aggressive fluids. Hydrophilic PTFE membranes are typically used in filtering aqueous solutions, while hydrophobic PTFE membranes are typically used for filtering
Hydrophobic, polytetrafluoroethene (PTFE) membranes are recommended for use with non-aqueous solvents. Organic-based, highly acidic or basic samples and solvents.
PTFE CR Solvent Filter, 47 mm, 0.2 µm, 100/pk - WAT200535 | Aijiren TechnologyA 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50 Related Products: Sterile Ptfe Filter Compare this item Carboy Vent Filter, 0.2 Micron Aijiren Tech Nalgene
Pall Laboratory. of air and other gasses Have Broad chemical compatibility for solvent filtration Comes with PTFE membrane and polypropylene housing. Membrane has 0.2µm pore size and 37mm diameter with effective filtration area of 7.5cm2. Hose barb connectors are 6.4–9.5mm.
biological fluids and gases is usually done with 0.2 or 0.22 µm pore filter membranes. Clarification and prefiltration of solutions and solvents is best accomplished with 0.45 µm or larger filter membranes. Prefiltration to improve filter performance can also be
Customized hydrophobic nylon syringe filter for hplc millex. Hydrophilic PTFE syringe filters have broad chemical compatibility and high pH resistance and are optically clear when wet with water. They are versatile filters for use with aqueous and aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.