Use these all-plastic disposable syringes with your Titan3, Target2, and Choice Basic syringe filters. Comprising a polypropylene barrel and polyethylene plunger, these syringes eliminate problems with rubber or synthetic plunger gaskets and requires no silicone or oil lubricant in the barrel. Choose from in 1, 3, 5, 10, 20, 30, and 50 mL sizes.
What’s the syringe filter diameter to be chosen? 13mm or 25mm? All filter inlets are female Luer-Lock compatible, have inert polypropylene housings and come in three diameters. The diameter is determined by the volume to be filtered. 13 mm Syringe Filters. For sample volumes <10 mL range; Ideal choice for most applications;
Acrodisc® Syringe Filter with Supor® Membrane - 0.45 µm, 25 mm modified acrylic housing (1000/pkg) Product ID 4508 Unit of Measure 1/PAC Min Order Qty 1 Pore Size 0.45 µm µm nominal Diameter (Metric) 25 mm Effective Filtration Area (Metric) 2.8 cm² Filter Media Polyethersulfone (PES) Hold-Up Volume <300 µL Housing Material Modified acrylic
I am wondering if syringe filters, meant to be used with liquid, can be used with air. As a possible problem, I can see a dry filter not adhering to the housing properly.
Filters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives Female luer-lock inlet and male luer slip outlet Color coded by membrane type for easy identification, and membrane material and pore size are printed on the housing Available individually packed in peel-to-open paper/plastic blister packs Also available bulk packed in PVDF, PES, PTFE, and
Designed for sterilizing and clarifying sterile solutions. Millex™ Sterile Syringe Filters: MCE Membrane are ready-to-use, syringe-driven units that have never been touched by human hands during filter assembly. Feature 0.22, 0.45 and 0.80µm pore sizes; medical-grade filters available. Pricing and Availability.
Therefore, the material of the filter membrane and housing structure is very important. The syringe filter structure is composed of two parts, housing and membrane. Syringe filter can be made of different materials. Usually housing is polypropylene pp or nylon polyamide. PP is a semi-crystalline thermoplastic.
Syringe filters (or wheel filters) are a single-use filter cartridge locate at the end of a syringe. Syringe filters can have luer lock fittings for a secure fit to the syringe. Choose from our wide assortment of filters to suit your application. Syringe filters come in a variety of membrane types.
Filter connectors are female Luer lock inlet and male Luer slip outlet. The 4 mm diameter syringe filter features a filter area of 0.07 cm2 and can filter up to 1 ml of sample volume, while the 15 mm diameter syringe filter has a filter area of 1.7 cm2 and can filter up to 5 ml of sample volume.
Filter requires 13, 25, 50 mm diameter membrane filter. 25 mm diameter filtration area 3 cm². Flow rates: Typical values for water at 1 bar (100 kPa), 70 ml/min with 0.2μm, 110 ml/min with 0.45 μm pore size filters. Materials: polypropylene top and bottom part. Silicone gasket (20.5 x 26.5mm, replacement for a pack of 10)
Syringe Filters MicroLiter syringe filters are manufactured with the most advanced construction methods and design features available today. A variety of media types and pore sizes are available. Housings are polypropylene, solvent resistant and clearly marked for media and pore size. All packaging is marked with lot
MilliporeSigma. Reusable filter unit used to ultraclean or sterilize small volumes dispensed by syringe. 25mm microsyringe filter holder Stainless-steel housing Polytetrafluoroethylene (PTFE) seals Filtration area: 3.9cm2 Luer-Lok™ inlet Male Luer-Slip™ outlet . Related Products: Reusable Syringe Filter. Compare this item.
With a maximum housing pressure of 150 psig (10 bar), solutions can be filtered faster. Low Extractables, Low Binding A variety of membranes and housings ensure chemical compatibility with a range of samples and solvents. Ordering Information. 33 mm Millex® syringe filters; 4, 13 and 25 mm Millex® syringe filters; 50 mm Millex® syringe filters
Polypropylene, nylon, and PTFE membranes are ideal for sample preparation and small volume chemical filtration. -Ideal for sterile filtration -Manufacturing process certified to ISO 9001 -Biosafe according to Class VI plastics tests Syringe filters with cellulose acetate or polyethersulfone membranes are ideal for sterile filtration of buffers, tissue culture media or additives, and other
Syringe Filters. Welchrom ® Syringe Filters are of good quality, well packaged, and offered at a fair and competitive price. The most commonly used types are available in all of the major membranes including Nylon, PTFE, PES, MCE and PVDF, which are supplied in 13 mm id, 25 mm id formats in virgin medical polypropylene housings.