Height (mm) Surface Area cm2 Volume (ml) Quality Level Hydrophobicity Housing Material Membrane Material Package Size Sterility Technique Available for Sale United States Globally 13 mm 0.2 um syringe filter Applied Filters: Keyword: '13 mm 0.2 um syringe filter' Showing 1-29 of 29 results for " 13 mm 0.2 um syringe filter " within Products
These Corning® syringe filters have polypropylene copolymer housings, female Luer lock inlets and male Luer slip outlets. Regenerated cellulose (RC) membranes are the best choice for DMSO compatibility. 100% integrity tested, sterile and nonpyrogenic and noncytotoxic Manufactured in accordance with ISO 9001 standards
0.2 µm µm nominal Diameter (Metric) 13 mm Effective Filtration Area (Metric) 1 cm² Filter Media Hydrophobic PTFE membrane on a polypropylene support Hold-Up Volume <30 µL Housing Material polypropylene Maximum Operating Pressure (bar) 6.9 bar Maximum Operating Temperature (Metric) 100 °C Typical Flow Rate 245 mL/min at 1.0 bar (100 kPa, 15 psi)
Supplier: Pall Laboratory. These 13 mm syringe filters offer an available prefiltration layer and wide choice of filter media. Wide range of filter media available. Available in 0.2 µm for UHPLC applications. Available with prefilter for difficult to filter samples. Color coded for easy identification.
13 mm Acrodisc syringe filters are designed for the filtration of sample volumes up to 10 mL. They feature an effective filtration area of 1.0 cm 2 and a polypropylene housing which has excellent chemical compatibility properties. The syringe filters are HPLC certified for low levels of UV-absorbing extractables, preventing spurious peaks on chromatograms, ensuring both accurate and reliable results.
Pore size and membrane type is printed on every syringe filter. Sterile filters are individually blister-wrapped in cases of 50, nonsterile in cases of 50. Compliance. Manufactured to ISO 9002 and GMP standards, and 100% integrity tested.
Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the cartridges remove fragments that would otherwise damage narrow bore equipment.
Pall 13 mm Acrodisc syringe filters are available with a standard male slip luer outlet or Pall’s proprietary minispike outlet. The minispike allows for easy handling with a HPLC vial, and offers a reduced hold-up volume, ensuring maximum filtrate recovery. Typical hold-up volumes: 13 mm, male slip luer outlet: < 30 μm 13 mm, minispike: < 14 μm
Puradisc 4 Syringe Filters. membranes Pore sizes: 0.2 or 0.45 µm Puradisc syringe filters are designed for quick and efficient filtration of samples. Syringe filters are produced from pigment-free polypropylene and have standard inlet and outlet luer connections. Sterile filters are supplied in medical-grade.
However, it should be noted that nylon syringe filters are not recommended for sample fluids which are strongly acidic. 13 mm Acrodisc syringe filters are designed for the filtration of sample volumes up to 10 mL. They feature an effective filtration area of 1.0 cm 2 and a polypropylene housing which has excellent chemical compatibility properties. The syringe filters are HPLC certified for low levels of UV-absorbing extractables, preventing spurious peaks on chromatograms, ensuring both
Aijiren Tech™ Nalgene™ syringe filters are built to meet your lab’s clarification and sterilization needs. Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications. Whether your research necessitates prefiltration, sample preparation, sterile filtration, laboratory filtration, or gas venting, Nalgene syringe filters are lab essentials.
Syringe filters from Grainger are molded in the prolypropylene housings to help provide a reliable seal without adhesives. Glass fiber filters can handle viscose solutions and turbid liquids. PES filters can easily prefilter and filter buffers and culture media. PTFE filters can handle degassing and clarifying aqueous samples and filtering strong acid and alkali solvents.
Millex-GS Syringe Filter Unit, 0.22 µm Match Criteria: Product Name All Photos ( 1) Millex-AA Syringe Filter Unit, 0.80 µm, mixed cellulose esters, 25 mm Match Criteria: Product Name All Photos ( 1) Medical Millex-GV Syringe Filter Unit, 0.22 µm, PVDF, 33 mm, gamma sterilized Match Criteria: Product Name All Photos ( 1)
Pall Acrodisc Syringe Filters with Supor Membrane, Sterile - 0.2 µm, 13 mm (75/pkg) Manufacturer: Pall 4602. The syringe filter is the laboratory workhorse that protects sample or culture quality and sterility.Acrodisc syringe filters with Supor membrane have superior performance in a variety of sterile laboratory filtration applications.
SLGVR13SL Millipore Millex-GV Filter, 0.22 µm, PVDF, 13 mm, ethylene oxide sterilized A 13 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Comes in a pack of 100. View Products on Sigmaaldrich.com SLGVR13SL 100 Price could not be retrieved Recommended Products Overview Overview Description Product Information