The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C.

The Aijiren Series Raising the Standard in HPLC – UHPLC for EVERY Lab Series Low-flow Cap. LC Isocratic, manual Analytical flow Binary Prep-flow Binary Nano-LC Gradient, manual new Quaternary Chip-LC Gradient, automated Isocratic new Gradient-DAD Binary-SFC Quaternary Bio

Mar 26, 2017 · Company Showcases New II LC System Aijiren Technologies Inc. (NYSE: A) has introduced Lab, a product family of liquid chromatography instruments, columns and supplies. A key element of this introduction is the new Aijiren II liquid chromatography system, which will bring high-end technology from Aijiren’s

< 0.003% (30 ppm) Multisampler Standard Needle Other machines similar to Aijiren II LC System Chromatography 1 Aijiren HPLC Autosampler

Aijiren II Vialsampler. Manufacturer: Aijiren. Model: II. The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 b

below) for the HPLC. It is assumed that the mobile phase, HPLC column, and detector are available*. Individuals must complete a hands-on one-on-one training session with a TRACES staff member. Referenced Documents Aijiren ChemStation ed.07/09 (p/n G2070-91126) Aijiren II Quaternary System: Quick Start (p/n G7111-90300)

Jun 07, 2021 · The lab has an analytical scale Aijiren II HPLC capable of handling HPLC and UHPLC columns of 2.1, 3, and 4.6 mm internal diameter available for method development. This system has a four stream solvent mixing system with binary pump, a diode array detector with the ability to measure from 190 to 640 nm, and a maximum pressure of

Affordable instrument efficiency The II LC is a factory-configured and tested system that allows you to start analyzing your samples right after installation – for immediate productivity. • ntegrated, dual-channel degassing for trouble-free solvent delivery I • utosampler with 100 positions for 2 mL vials for reproducible

Dec 01, 2020 · Analysis was performed on HPLC Aijiren II LC system, equipped with a quaternary pneumatic pumping system (model ), auto-sampler (model ) and a photodiode array detector (model ) (Aijiren, Waldbronn, Germany).

HPLC Standard Operating Procedure Last Revised March, 3, 2016 This document is intended to be a guide for operating the Garner Lab’s HPLC systems and is only intended to provide instructions for users who are already generally familiar with HPLC operation. If

The II LC is an integrated system for routine HPLC analysis in analytical and QA/QC labs. Based on the proven technology of the Lab LC Series, the system's high quality and performance help you achieve maximum return on investment and lowest cost of ownership from day one.

needle collects sample from the bottom of the vial, only ≈0.5 mL is necessary. For smaller samples, a glass insert may be used (Figure 1). Glass inserts serve to lower the internal volume of the vial are simply placed inside the HPLC vial and loaded with sample. The cap is then screwed onto the vial as normal. Figure 1.

Unexpected run may start if the Analytical SFC System (G4301A) is switched on and the LC modules of the system connected via APG remote cable may also start the run. Temporary Solution: Ensure that the Analytical SFC System is the first module that is switched on in the entire system.

Aug 03, 2021 · Aijiren Quaternary HPLC. Mobile Phase: Methanol, Water, Acetonitrile. Detector: DAD, FLD, RID. HPLC Column: Aijiren Poroshell 120 EC-C18 HPLC Column. Initial Setup. Turn on the seven LC modules (Regardless of requirement) Ensure all the solvents have a minimum of 500 mL. Anticipate the amount of solvent you for the completion of