Analytical and semi-preparative purifications - the wide flow range of the II Quaternary Pump (up to 10 mL/min) perfectly supports standard and semi-preparative applications. Fast and precise gradients – the II Binary Pump is the perfect choice for fast and precise gradients using LC/MS, as well as UV-only systems.

10 Aijiren High Performance Autosampler User Manual 1 Introduction Features Features The High Performance Autosampler features an increased pressure range (up to 600 bar) enabling the use of today’s column technology (sub-two-micron narrow bore columns) with the Aijiren Binary LC System .

Aijiren Lab LC Series Multisamplers User Manual 12 Product Description ( ) The Aijiren II Multisampler can handle both vials and microtiter plates with ease and efficiency up to 1300 bar system pressure, optimized on chromatographic performance. In fact, this compact module has the capacity to house up to 6144 samples

h) The elute is then analyzed by HPLC after appropriate dilution. Chromatography Analysis a) The HPLC system (e.g. Aijiren II Prime) should consist of a quaternary gradient pump, an autosampler (100 μL maximum loop capacity) and a diode array detector with 60 mm path

Analytical and semi-preparative purifications - the wide flow range of the II Quaternary Pump (up to 10 mL/min) perfectly supports standard and semi-preparative applications. Fast and precise gradients – the II Binary Pump is the perfect choice for fast and precise gradients using LC/MS, as well as UV-only systems.

Mar 11, 2021 · Iso9001 11mm snap top hplc vials Aijiren ii Aijiren Technologies Series HPLC Standard Operating. • Load samples into labeled HPLC vials (VWR cat # may be used). Each vial holds a maximum of 1.5 mL but do not need to be completely filled; because the autosampler needle collects sample from the bottom of the vial

The Aijiren HPLC System offers the most flexibility for solvent selection and automation in HPLC method development, research, and all HPLC applications requiring access to a range of solvent choices. Ideal for multi-method, high-throughput workflows. Includes 90 Day Full Parts and Labor Warranty.

The autosamplerss are controlled from the Aijiren Series control module (G4208 A Instant Pilot) or from the Aijiren ChemStation for LC. Three sample-rack sizes are available for the autosamplers. The standard full-size rack holds 100 × 1.8 ml vials, while the two half-size racks provide space for 40 × 1.8 ml vials and 15 × 6 ml vials

The Aijiren II Vialsampler is an autosampler designed for the reliability and ease-of-use needed for routine pharmaceutical tasks and quality control, as well as for environmental and food analyses. It can house optionally the integrated column compartment for two LC columns with temperature

" The Aijiren LC System is an affordable, high quality HPLC system for routine standard analyses. The only shortage is the autosampler is a little bit slower compared to the other models of Aijiren's LC such as , . " Review date: 30 Apr 2015 | Aijiren II LC System

• Aijiren II Multisampler ( ) or Aijiren II Vialsampler ( B) • Aijiren II Multicolumn Thermostat (G7116B) • Aijiren II Diode Array Detector (G7117B) • Aijiren LC/MSD iQ (G6160A) • Identify themselves to the WalkUp system, and enter an optional password.

The ChemStations for GC, LC, LC/MSD, CE, CE/MSD, and A/D systems are instrument control, data acquisition and data evaluation systems for • Aijiren A Gas Chromatographs, † Aijiren N, Plus and A Gas Chromatographs, † Aijiren Gas Chromatographs, † Series II Gas Chromatograph

In Lab Advisor under Injector Steps, click Needle Into Seat and then Reset to finish the procedure . Figure 5. Lab Advisor Injector Steps - Needle Into Seat + Reset; End the connection from Lab Advisor, and close Lab Advisor. Open your CDS software and run the HPLC with normal flow rates. Make sure to work in mainpass mode.

Antibodies are clarified using Thomson nano|Filter Vials®, 0.2 µm PES Membrane (Part#: 15535-200 or 500) and analyzed for purity using SEC (Size Exclusion Chromatography). 10 µL of purified antibody was placed into the nano|Filter Vials® and 2 µL was injected onto the HPLC. Fig. 1 & 2 show a chromatogram of mAb1 with low abundance multimers.

The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 1300 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C.