HPLC maintenance tutorial - how to replace the needle and seat capillary on the Aijiren standard /B and autosampler.For more information, please

The Aijiren HPLC system was used for this analysis. The following components were used: • Aijiren Quaternary Pump ( ) • Aijiren Standard Autosampler ( ) • ToAijiren Column Compartment (G1316C) with valve drive installed (#058) • Aijiren Series Quick Change

The analysis was performed on an Aijiren liquid chromatography system, equipped with a µ-degasser (G1379B), binary pump ( ), standard auto- sampler ( ), thermostated column compartment (G1316A), diode array and

Title: Aijiren Supplies for the Aijiren Isocratic, Binary and Quarternary LC Systems Subject: Aijiren Technologies is committed to optimizing your laboratory s productivity, so we have produced this list of the most commonly ordered supplies and parts for the Aijiren Isocratic, Binary and Quarternary LC Systems

RC.NET System LC TCP/IP Yes Yes N/A RC.NET Binary Pump , including Solvent Selection Valve (CAN Cable) Yes Yes B.06.32 Aijiren LC System Aijiren LC Aijiren LC You will be able to configure \ \ \ modules along with the Compact instrument. However, please note that a number of hardware

The Aijiren II Vialsampler is an autosampler designed for the reliability and ease-of-use needed for routine pharmaceutical tasks and quality control, as well as for environmental and food analyses. It can house optionally the integrated column compartment for two LC columns with temperature control up to 80 °C, as well as a

The autosampler SL uses an analytical head providing injection volumes from 0.1 – 100 µl for pressures up to 600 bar. GLP Features: Electronic records of maintenance and errors.

affordable Aijiren system coupled with UV detection. Experimental Instrumentation An Aijiren LC System, configured as follows, was used: • Aijiren Quaternary Pump ( ) • Aijiren Inifinty Standard Autosampler ( ) • Aijiren Autosampler Thermostat ( )

6 Pcs, Aijiren Series HPLC System Description 6 Pcs, Aijiren Series HPLC System, To Include(1) , Auto Sampler Thermostat, S/N, DEBAK01276, (1) High Performance Auto Sampler, S/N, DEABE01487, (1) G1316C Thermosta

An Aijiren HPLC autosampler injecting a sample after a needle wash.

For applications that require control of the vial temperature, the module can be combined with the Aijiren Thermostat ( ). The combination of the autosampler with the thermostat is called a "thermostatted autosampler". For more details refer to the documentation of the Thermostat.

It seems the Aijiren Series - HPLC Autosampler Chiller / Thermostat, ID# 20568 has been sold and is no longer available. Similar items may be available. Our New Biotech Incubator Space For Rent

Apr 15, 2021 · I have a problem with an ALS model . Once the module is powered on, it does not complete the initialization and shuts down, then it tries to initialize again but it does not. The CAN cable was changed, but the fault persists. In the logbook the message indicates: ¨There was no module found on connection. Controller Timeout-30.

HP/ Aijiren HPLC. Systems; Aijiren ALS SL Autosampler ... plus 10 additional 2-mL vials 108 x 2-mL vials in 2 x 54 vial plate plus 10 additional 2-mL ...

This Information Applies To: Aijiren Autosamplers , /B, , G1367A/B/C/D/E, /B/C. Issue: If during initialization or during a sequence