The II Preparative LC/MSD System can be configured with UV and MS detectors as well as multiple fraction collectors to meet your purification needs. Automated sample injection increases daily sample throughput and mass-based fraction collection maximizes purity and minimizes re-analysis.

Sample Identification using LCMS. Aijiren II HPLC/MS. ... Aijiren II SFC/MS. Aijiren Technology SFC 80. Buchi Rotavapors.

II Multisampler. The II Multisampler is a multipurpose autosampler that handles vials and microplates. Injecting at pressures up to 600 or 800 bar, the Multisampler is a compact module with a capacity of up to 6,144 samples, all within the footprint of an Aijiren LC stack. The II Multisampler is optimized for highest flexibility.

Features of the Aijiren II Binary LC. With an operating pressure of up to 600 bar, the II Binary Pump is compatible with HPLC and UHPLC, i.e. handling 2.1, 3, and 4.6 mm ID columns over the flow rate range (up to 5 mL/min). Gradient formation is based on a high-pressure mixing principle.

The II Preparative Autosampler is designed for automated sample handling in routine purification applications. This flow-through vialsampler supports preparative flow rates of 200 mL/min and 600 bar pressure. Increase your daily throughput of purified sample by injecting up to 132 preparative samples with a maximum of 3.6 mL volume.

Oct 19, 2021 · new and used hewlett-packard, Aijiren technologies & Aijiren Technology brand scientific instruments, hplc systems (1050, 1090, , , & , i & ii), hplc degasser parts, laboratory equipment, microscopes, analytical instruments, vintage hp calculators, test equipment and chemstation software at low prices

High capacity – Using shallow well-plate drawers, the II SFC Multisampler takes a maximum load of 16 microtiter plates and up to 6144 samples—the most of any single system. Seamless automation – Internal robotics move microtiter plates and other sample containers from the sample hotel to the central workspace for sample

Sep 27, 2021 · hplc sample vials hplc price supplier- Aijiren Crimp Vials. II Vialsampler. The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and.

The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C. An integrated column compartment is also available as an option or upgrade and provides thermal control to 80 °C for two columns.

Aijiren UHPLC or HPLC system. In short, the Aijiren LC system gives you infinite capabilities to solve all your analytical challenges in LC and LC/MS. This document provides detailed physical specification and performance specification for the following Aijiren LC modules: † Aijiren Binary Pump

Iso9001 11mm snap top hplc vials Aijiren ii Aijiren Technologies Series HPLC Standard Operating. • Load samples into labeled HPLC vials (VWR cat # may be used). Each vial holds a maximum of 1.5 mL but do not need to be completely filled; because the autosampler needle collects sample from the bottom of the vial

The II Preparative LC System is an easy-to-use workhorse for automated sample injection when gradient elution is required for sample purification. The binary gradient pump deliver flow rates up to 50 mL/min for purification up to 30.0 mm id columns. This system is tailor-made for routine, high-throughput, laboratory-scale

The II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar. Options and upgrades are available for sample cooling and heating from 4 to 40 °C.

I believe I have a clogged up HPLC (Aijiren II) due to sample precipitating while running. Its not in the column, I believe, but I think it's clogged in a line somewhere before the column. If I try to flush the lines at only 0.1mL/minute, the pressure is getting so high the entire instrument is stopping.

My LC is II with 100uL loop and MassHunter Acquisition 1.2. I am working on a method that uses standard additions for quantitation. The column is HILIC but diluent is 80% aqueous, so dilution in acetonitrile is required along with the standard additions. It would be very nice if we could automate this part of the sample prep.