The Aijiren Series autosampler is designed for use with other modules of the Aijiren Series LC system or with other LC systems if adequate remote control inputs and outputs are available. The autosampler is controlled from the Aijiren Series control module or from the Aijiren ChemStation. for LC systems.

Aijiren Series DAD/MWD detectors ( /B/C, G1365 A/B/C), the Aijiren Series fluorescence detector and the Aijiren G1946C/D, G1956A/B LC-MSD are fully supported other detectors can be used but are. not supported for fraction collection. operating modes: Discrete fractions: default mode for all vessels. The flow is diverted to

Standard opening 2ml LC-MS vials supplier manufacturer Amazon lab vials for HPLC sampling for wholesalesAutosampler Vial,2ml HPLC Vial,Clear Lab Vial,Sample Vial with Writing Area Tel:+8618057059123 Email:market@aijirenvial.com

May 11, 2006 · 7/ The RID has W-lamp that cannot be changed easily. Rated at 40,000hrs, the lamp must be changed by the factory (Aijiren), together with internal mirrors, at a high cost (approx. 70% of brand new RID). 8/ The oven/heater has a deep trap for liquid spill, and it is not easy to clean this part.

The Aijiren ALS Thermostat HPLC series controls temperature for either HPLC’s or fraction collectors. The ALS thermostat contains Peltier-controlled heat exchangers. A fan draws air from the area above the sample vial tray of the autosampler and is then blown through the fins of the cooling/heating module.

In addition, Aijiren's Series LC platform helps you achieve all the performance, all the time with a flexible, modular design that allows you to configure the system to meet your unique application requirements. The new Aijiren Series is designed for ultimate robustness, reliability, and performance.

Also compatible with the Aijiren Series sample capacity extension for further expansion of the sample capacity. Injection cycle time. Typically < 30 s using following standard conditions: Default draw speed: 200 µl/min Default eject speed: 200 µl/min Injection volume: 5 µl. Carry-over

Aug 16, 2021 · lab standard opening hplc sample vials Aijiren series Aijiren 2ml hplc 9-425 glass vial price-Aijiren hplc lab vials. 2. 9-425 screw top vials is 40% larger opening than

The Aijiren Series Raising the Standard in HPLC – UHPLC for EVERY Lab June 27, 2013 Series Isocratic, manual Gradient, manual Gradient, automated Gradient-DAD Low-flow Cap.LC Nano-LC Chip-LC Analytical flow Binary Quaternary Isocratic Binary-SFC Quaternary Bio-Inert Prep-flow

The Lab Analytical HPLC Systems are highly efficient HPLC and UHPLC systems that feature the latest technology. The II LC delivers high quality for an affordable price. The II LC is the flexible instrument choice, while the II Prime LC brings more operational convenience.

LC System. Take care in placement of the system, trying to avoid placement near heating and air conditioning vents to insure optimum performance. • Site humidity is within the recommended range of <95%, non-condensing. • Bench space is adequate and can support the weight of the Aijiren system, including all LC modules and the

Sample Loops Stator Face Assemblies Aijiren LC Rheodyne series Aijiren Valves Stator Face Part No. Part No. 1050 Manual injector 7125 Manual injector 7725 Autosampler , Switching valve Aijiren LC Rheodyne Series Aijiren Valves Stator Face Part No. Part No.

27 x Eppendorf plate for Eppendorf tubes of 0.5 ml,1.5 ml or 2.0ml. Maximum plate height with plate tray G2258-60001: 50 mm. This refurbished HP / Aijiren Series G2258A Dual Loop (Thermostatted) Autosampler is in great condition. It has been tested at SpectraLab Scientific. A 90 day warranty is included.

Iso9001 11mm snap top hplc vials Aijiren ii -Aijiren hplc lab vialsAijiren Lab LC Series Specification CompendiumAijiren II DAD FS (G7117A) 62 A Tel:+8618057059123 Email:market@aijirenvial.com