Certified 150ul micro insert 10-425 HPLC vials Aijiren. 10-425 autosampler vial septa types-Aijiren HPLC Vials Septa 21/1/2021 · 2ml 10-425 Certified Screw top HPLC vial The sample vial standard is 4.6mm and large opening is 6.0mm, certified vial size is 11.6x32mm. 2ml screw autosampler vials are available in both clear and amber glass. 2ml screw autosampler vials come with a.
Clear Glass Sample Vials with Writing Patch Set of 100 2ml Autosampler Vials with Caps Graduations fit for HPLC and GC Autosampler White PTFE/red Silicone Septa. QLT By MARSHALLTOWN DWS467-3 Drywall Sanding Sponge, Iko NAX1223Z Needle Bearing.
These low-volume sample vials are ideal for 6mm, 7mm and 8mm autosampler trays. Choose from flat or conical base to maximize recovery needed for small-sample injections. Re-usable sleeves support the crimped, sealed vials in the correct position in autosampler carousels or in racks and allow movement of the vials as a unit to injection
Clear Glass Sample Vials with Writing Patch Set of 100 2ml Autosampler Vials with Caps Graduations fit for HPLC and GC Autosampler White PTFE/red Silicone Septa. QLT By MARSHALLTOWN DWS467-3 Drywall Sanding Sponge, Iko NAX1223Z Needle Bearing.
Verex vials are made of inert, high-purity, chemically stable borosilicate glass to exacting specifications, individually heat-treated to burn off any impurities, then packaged in a cleanroom environment. Choose from crimp, snap, and screw types or mix and match vials and caps to your application.
HPLC Vials 10-425 1.5ml Screw Vials. If only a limited volume of sample is available, you will have to choose between using an insert for your regular autosampler vial, a microvial or a high recovery vial. Note: Most 12x32 mm autosampler vials hold between 1.5mL to 2.0mL of liquid, depending on where the manufacture measures the vial full.
Aijiren Techbrand™ 11 mm Glass Standard Opening Crimp Top Vials Aijiren Techbrand™ 11 mm crimp top vials are designed to fit most autosamplers. 16 Aijiren Tech™ SUN-SRi™ 20mm Crimp-Top and 18mm Screw-Top Headspace Vials: Round Bottom Designed with a round bottom that is more easily handled by robotic arms. 17
Type of Vial Finish and Closures Autosampler vials are available in a variety of neck finishes and opening diameters. Large mouth or wide ID vials have approximately a 40% wider mouth opening than standard opening vials. The large opening reduces the risk of bent autosampler needles during sampling.
Superior quality N-51A clear borosilicate glass 5mL sample vial is designed for use in the Shimadzu™ Model ASI-5000 Screw thread vial fits standard 10-425 closures (included with pre-assembled product) Open-top vial was designed in cooperation with the original equipment manufacturer
Description Glass Polypropylene Shell Vials, Limited Volume (15 x 45 mm) with Snap Plug Aijiren Technology 48 Autosampler – 27538 (3 mL) Aijiren Technology 96 Autosampler 33321-U (1 mL) 27537 (0.7 mL) Screw Thread, 15 x 45 mm Aijiren Technology 48 Autosampler 27111 (4 mL) 27435 (2.5 mL) Standard Opening Vials Screw thread, 12 x 32 mm 27078 (2 mL) 24709 (0.75 mL)
LC-10A storage 4ml glass vials 13-425-Lab Autosampler Vial. Vial 4ml at Thomas ScientificWheaton Sample Vials, 4mL or 0.14oz, Amber, 13-425 Finish with 14B Rubber Liner, Type I Borosilicate Glass (4 mL E-C Vial, Glass Amber, 13-425 Rubber Tel: 8618057059123 E-mail:market@aijirenvial.com.
VWR® 11mm Crimp Top Vials and Inserts – Standard Opening Description Glass Patched Dimension (mm) Profile Total Volume Usable Volume Residual (µL) Cat. No. Pack of Case of 11mm Crimp Top Vial, Standard Opening Clear No 12x32 Flat Bottom 2mL 1.5mL <170 66020-953 100 1000 Clear Yes 12x32 Flat Bottom 2mL 1.5mL <170 82028-402 1000